IP Telephony - NBX
cancel
Showing results for 
Search instead for 
Did you mean: 

Analog Terminal Adapter

magnuso
Occasional Contributor

Analog Terminal Adapter

I have NBX Ver: R6_5_18 Im running SIP

and im trying to connect ATA 3C10400B REV:BF

I get IP adress the first 5 sec and then im losing the IP. Anyone with a solution. I heard something that i need REV:D on the ATA is that correct?

4 REPLIES
bosoxfan_1
Super Advisor

Re: Analog Terminal Adapter

yes, there is a known issue that this card keeps rebooting. You should call your 3Com representative for the patch to this issue.

roo5ter
Occasional Advisor

Re: Analog Terminal Adapter

Thank you to Wally at 3Com support to this fix.



We have found a workaround for the issue of the 3C10400B continuing to reboot after upgrading to 6.5.18.

The workaround involves renaming a file.



Here are the directions:



1. ftp into the NBX using the administrator password 2. cd /htfs0/R6_5_18/BootLoaders/ATA_g3 3. In this folder, you will see a file called "revision.dat" (lower case r). This file should be named "Revision.dat" (Upper case R).

4. do a "get revision.dat" to pull the file off and place on your PC 5. on your PC, rename the file to "Revision.dat"

6. do a "put Revision.dat"

7. next, since you do not need the "revision.dat" file, do a dele revision.dat. This will leave only the upper case "Revision.dat" file 8.That's it !!! The 3C10400B will now reboot.

bosoxfan_1
Super Advisor

Re: Analog Terminal Adapter

yes, that is what the patch does but much easier to install instead of customers ftp'ing into the box

magnuso
Occasional Contributor

Re: Analog Terminal Adapter

Done that.

Does it need a reboot on NBX?



Probely i do that and i be back if it works.



THX for the solution. :)



Working great.

This message was edited by magnuso on 4-24-09 @ 2:22 AM