IP Telephony - NBX
cancel
Showing results for 
Search instead for 
Did you mean: 

Block outgoing Caller ID feature 889 and 890 Not Allowed

Speedyway
Occasional Visitor

Block outgoing Caller ID feature 889 and 890 Not Allowed

NBX 100 running R6.0.63

 

One of our department would like to use the block caller ID on outgoing calls feature. I found in the admin manual that this feature can be enabled using the feature button with code 889 or 890.

 

889 prevents system from sending out caller ID for all calls.

 

890 prevents system from sending out caller ID for the next dialed call only.

 

However, when I tried either code, the NBX phone says “Not Allowed”

 

Does anyone know how to enable this feature?

 

Is this something I need to do from the Admin setup or the dial plan?

 

Thanks.

1 REPLY
Speedyway
Occasional Visitor

Re: Block outgoing Caller ID feature 889 and 890 Not Allowed

I found under user settings - my calling privileges - features settings tab

 

There is a list of feature code and description and one of them is 889 - Caller ID(CLIR all calls). 

 

It says status Off.

 

I guess the question is where can I enable that?