Configure VLAN in ATA 3c10400B

[Facundo]

I need help to configure a Static Vlan in Ata 3c10400B

Somebody could help me???

I try connet by serial port bat i dont have Menu or Command help

thanks

[merlin_1]

You did not mention if the ATA was in a layer2 or a Layer 3 envireonment . either way , when the device gets its download , it will be a part of the information in the download .

At layer 3 , the default network vlan ( vlan 1 ) is used prior to the ATA getting a download and once the download is completed , the ATA will switch over to the new vlan in the download  info from the NCP .

[bosoxfan_1]

Please try this command: vcxSetVLANConfig 1,5


1 means enable vlan mode, 5 is vlan ID.





->vcxSetVLANConfig 1,5

Then do an nbxShowConfig and you will see the

EE VLAN ID set to 5