IP Telephony - NBX
cancel
Showing results for 
Search instead for 
Did you mean: 

Configure VLAN in ATA 3c10400B

Facundo
Occasional Visitor

Configure VLAN in ATA 3c10400B

I need help to configure a Static Vlan in Ata 3c10400B



Somebody could help me???



I try connet by serial port bat i dont have Menu or Command help



thanks



2 REPLIES
merlin_1
Super Advisor

Re: Configure VLAN in ATA 3c10400B

You did not mention if the ATA was in a layer2 or a Layer 3 envireonment . either way , when the device gets its download , it will be a part of the information in the download .



 



At layer 3 , the default network vlan ( vlan 1 ) is used prior to the ATA getting a download and once the download is completed , the ATA will switch over to the new vlan in the download  info from the NCP .



bosoxfan_1
Super Advisor

Re: Configure VLAN in ATA 3c10400B






Please try this command: vcxSetVLANConfig 1,5


1 means enable vlan mode, 5 is vlan ID.





->vcxSetVLANConfig 1,5



Then do an nbxShowConfig and you will see the



EE VLAN ID set to 5