Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
IP Telephony - NBX
cancel
Showing results for 
Search instead for 
Did you mean: 

Corrupted NBX Backup

Rockym
Advisor

Corrupted NBX Backup

Hello,

I'm having trouble restoring a database from an NBX.



Customer has an NBX100 and wants to restore the config to a V3001.



The restore process always ends up with the following error:

DB Upgrade - can't navigate in subdirectories







I assumed it was a compatibility issue so I tried it on another system with the same version of code and I get the following error:



NBX_DB_SCHEMA_ID_000001094

aa.tar

Entered vxtar "-xf" "DB.tar"

tar_open(): Error # 2

Entered vxtar "-xf" "etc.tar"

tar_open(): Error # 2

Entered vxtar "-xf" "vm.tar"

tar_open(): Error # 2

Entered vxtar "-tf" "/htfs0/NBXbackup.tar"

NBX_DB_SCHEMA_ID_000001094

aa.tar



Any ideas on how to get the config restored?



Thanks.









6 REPLIES
merlin_1
Super Advisor

Re: Corrupted NBX Backup

Boot back to a previous code or you can blow away the current database .



Knowledgebase has the commands for the solutions to purge your db or reboot to another version .

Rockym
Advisor

Re: Corrupted NBX Backup

Just to clarify,

If I boot to a previous version, I will be able to create a working backup?

beci
Occasional Contributor

Re: Corrupted NBX Backup

I do not believe that you can restore across systems.



The NBX 100 hardware is not the same as the V3001 hardware and that the NBX 100 backup cannot be restored onto V3001 hardware even if the software versions are the same.

thanks in advance

BECI


BECI
merlin_1
Super Advisor

Re: Corrupted NBX Backup

If all systems are on 5.0 or greater then you can restore across platforms . In the release notes it should detail this info .

beci
Occasional Contributor

Re: Corrupted NBX Backup

I see. 100 --> to V3000 or V5000 but not the other way around. Thanks!



BECI


BECI
merlin_1
Super Advisor

Re: Corrupted NBX Backup

R5.0 code :



100 to 5000 to 3000



I believe that you cannot go back to the NBX 100 but from v3000 to v5000 you can go back and forth

hardware / Device limitations etc .



6.0 is the same rules as 5.0 as well as upgrade to 6.0 from 5.0 from the platforms mentioned as well above . So V3K to V5K 5.0 to 6.0 and vice versa .



The NBX 100 is supported in 6.0 but very limited in functionality due to memory and resources .



V3001 series is not in the conversation due to first code was R6.0.63 GA'ed code .