IP Telephony - NBX
cancel
Showing results for 
Search instead for 
Did you mean: 

Elvis messages

MBlank
Advisor

Elvis messages

Client was getting the following messages coming up from the console connection on a V5000 at the time the system was down. Anyone know what they might mean?



0x1626ecd0 (nbxElvis): DIL Pipe to ROOM, nMessages = 0

0x1626ecd0 (nbxElvis): DIL Pipe to DNLD, nMessages = 2000

0x1626ecd0 (nbxElvis): Write Pipe to NBX Logger, nMessages = 4000

0x1626ecd0 (nbxElvis): DIL Pipe to Elvis, nMessages = 0

0x1626ecd0 (nbxElvis): CallP Pipe to Elvis, nMessages = 0

0x1626ecd0 (nbxElvis): Elvis Pipe to ROOM, nMessages = 0

0x1626ecd0 (nbxElvis): CCMDBServer: numMsgs 0 numTasks 1 txTimeouts 0 rxTimeouts 0

0x1626ecd0 (nbxElvis): End of DIL Resource Usage Information

0x1626ecd0 (nbxElvis): Start of DIL Resource Usage Information

0x1626ecd0 (nbxElvis): DIL Pipe to ROOM, nMessages = 0

0x1626ecd0 (nbxElvis): DIL Pipe to DNLD, nMessages = 2000

0x1626ecd0 (nbxElvis): Write Pipe to NBX Logger, nMessages = 4000

0x1626ecd0 (nbxElvis): DIL Pipe to Elvis, nMessages = 0

0x1626ecd0 (nbxElvis): CallP Pipe to Elvis, nMessages = 0

0x1626ecd0 (nbxElvis): Elvis Pipe to ROOM, nMessages = 0

0x1626ecd0 (nbxElvis): CCMDBServer: numMsgs 0 numTasks 1 txTimeouts 0 rxTimeouts 0

0x1626ecd0 (nbxElvis): End of DIL Resource Usage Information

0x1626ecd0 (nbxElvis): Start of DIL Resource Usage Information

0x1626ecd0 (nbxElvis): DIL Pipe to ROOM, nMessages = 0

0x1626ecd0 (nbxElvis): DIL Pipe to DNLD, nMessages = 2000

0x1626ecd0 (nbxElvis): Write Pipe to NBX Logger, nMessages = 4000

0x1626ecd0 (nbxElvis): DIL Pipe to Elvis, nMessages = 0

0x1626ecd0 (nbxElvis): CallP Pipe to Elvis, nMessages = 0

0x1626ecd0 (nbxElvis): Elvis Pipe to ROOM, nMessages = 0

0x1626ecd0 (nbxElvis): CCMDBServer: numMsgs 0 numTasks 1 txTimeouts 0 rxTimeouts 0

0x1626ecd0 (nbxElvis): End of DIL Resource Usage Information

0x1626ecd0 (nbxElvis): Start of DIL Resource Usage Information

0x1626ecd0 (nbxElvis): DIL Pipe to ROOM, nMessages = 0





Mike Blank

LeBlanc Communications

Mike Blank

LeBlanc Communications

5 REPLIES
merlin_1
Super Advisor

Re: Elvis messages

No idea



You say the site was down ? what was suspended ? Hyperterm ? Anytraces ?



The NBX not able to make/recieve calls ?

MBlank
Advisor

Re: Elvis messages

WIsh I could tell you, they rebooted it before they called me... all I have is the following:



1. At approximately 12:39 AM the http web interface stopped responding.

2. At approximately 3:20 AM the nbx stopped responding to ping requests.

3. At 8:30 AM we power cycled the device. I have attached the log of what the nbx was doing prior to the cycle.



Mike Blank

LeBlanc Communications

Mike Blank

LeBlanc Communications

bosoxfan_1
Super Advisor

Re: Elvis messages

nbxElvis is the Music on Hold/Music on Transfer task. This shows that the task was still working and pumping out packets.. so some other issue going on... without an "i" command and a savecore, it is a guess. This is a symptom of what occurred, not the root cause.

MAKNBX
Occasional Advisor

Re: Elvis messages

Hi all,

 

have the same errore and the NBX V5000 down, is it possibile to don't have a "resource" to passtrougth, follow your replay, for MOH/MOT. The MOH/MOT is brioadcast passtrought the LAN, have the problem on "CHIP" that "elaborate" the music to the LAN?

 

"End of DIL Resource Usage Information"  is very abnormal....WHY?

 

DIL Pipe to DNLD, nMessages = 2000
Write Pipe to NBX Logger, nMessages = 4000

 

The messages from who?

What is Pipe?

 

I don't know wath is this problem?

 

Hany other idea?

 

THANKS

 

 

bosoxfan
Trusted Contributor

Re: Elvis messages

Start a network trace.. seems like something may be "slamming" the NBX.. since "Elvis" is always running, this may be the innocent victim of what is slamming the NBX.... that should tell us what is going on.