IP Telephony - NBX
1748272 Members
4340 Online
108760 Solutions
New Discussion юеВ

Re: Error on the CDR Folder

 
SOLVED
Go to solution
bosoxfan
Trusted Contributor
Solution

Re: Error on the CDR Folder

Try creating the folder via telnet or a direct console connection

If telnet, make sure you can telnet into the NBX (go to http://IP address of NBX/sec_cont/system/systask.htm)

make sure telnet is enabled.

after logging in as the administrator, do the following

 

cd "/htfs0"  (note: the quotes are necessary)

mkdir "cdr" (quotes necessary again)

 

that is it!

Stephen Doyle
Valued Contributor

Re: Error on the CDR Folder

No Small task then, 

 

If I delete the code from the machine where do I obtain the same code as this would be the 1st time that we have had to do anything to the system has been a rock, as I have this system and another linked via wan. So will I have issues with resetting this up or is it a simple task>?

 

Thanks

Stephen

Stephen Doyle
Valued Contributor

Re: Error on the CDR Folder

That worked bosoxfan the Directory is now there in the root of the drive, will I need to reboot the system to allow it to populate?

I will have a look at it in the morning as there is no calls being made at this time
bosoxfan
Trusted Contributor

Re: Error on the CDR Folder

you should not have to reboot the system....

make sure CDR is enabled ...

A new file is created on a daily basis.. named by date (20110125.xml)