Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
IP Telephony - NBX
cancel
Showing results for 
Search instead for 
Did you mean: 

Extension shouold be of 0 digits

thall1226_1
Occasional Contributor

Extension shouold be of 0 digits

I am getting an error of Extension should be of 0 digits when I try to change anything on the Enable Features System wide page. It is a new system with the memory upgrade installed. Version 6.5.20. What am I missing? I checked and it is a 4 digit dial plan so I am leaving the 1000 series extension in the system. It seems that the problem has started since putting in the memory upgrade.

2 REPLIES
thall1226_1
Occasional Contributor

Re: Extension shouold be of 0 digits

Update. Turns out this was an IE8 issue and had to use compatibility mode.

merlin_1
Super Advisor

Re: Extension shouold be of 0 digits

We do see a lot if issues related to browsers . Unfortunately we do get calls about them . We only support 6.0 Browser at this time .