IP Telephony - NBX
1748156 Members
3916 Online
108758 Solutions
New Discussion юеВ

Extension shouold be of 0 digits

 
thall1226_1
Occasional Contributor

Extension shouold be of 0 digits

I am getting an error of Extension should be of 0 digits when I try to change anything on the Enable Features System wide page. It is a new system with the memory upgrade installed. Version 6.5.20. What am I missing? I checked and it is a 4 digit dial plan so I am leaving the 1000 series extension in the system. It seems that the problem has started since putting in the memory upgrade.

2 REPLIES 2
thall1226_1
Occasional Contributor

Re: Extension shouold be of 0 digits

Update. Turns out this was an IE8 issue and had to use compatibility mode.

merlin_1
Super Advisor

Re: Extension shouold be of 0 digits

We do see a lot if issues related to browsers . Unfortunately we do get calls about them . We only support 6.0 Browser at this time .