IP Telephony - NBX
cancel
Showing results for 
Search instead for 
Did you mean: 

How to Clear memory of DLC from console

Rockym
Advisor

How to Clear memory of DLC from console

Hello,

I want to manually set the NCP IP address in a digital line card( D version) or Clear it from the console,

How do I do it?



Thanks,

Rocky

This message was edited by Rockym on 2-19-09 @ 5:05 PM
3 REPLIES
bosoxfan_1
Super Advisor

Re: How to Clear memory of DLC from console

hi

Go to PSTN Gateway Configuration ->Digital Line Cards,

click on the line card, the ngo to IP Settings. You can manually assign the IP addresses here or if already assigned, change to 0.0.0.0

Rockym
Advisor

Re: How to Clear memory of DLC from console

The card is not auto discovering.

Is there a way to change it from the console?

Rockym
Advisor

Re: How to Clear memory of DLC from console

I figured it out.



Console into the DLC.

Reseat the module.

Hit space and/or reset to interrupt the boot process.



Enter:

T1

Then change the desired settings.



In my case I had to change the NCP IP and NCP mac address.