IP Telephony - NBX
cancel
Showing results for 
Search instead for 
Did you mean: 

IP Phone on VPN loses connection = IP sendto() call failed, returnStatus = 0xffffffff

nutrie
Advisor

IP Phone on VPN loses connection = IP sendto() call failed, returnStatus = 0xffffffff

V5000 running 6_0_63 code

I am getting excessive (?) logging when an IP phone loses connection to the network.  I am getting Megabytes of logging...I am guessing the excessive logs caused a system lockup at one point.

The VPN comes back up (in 2 - 10mintues) and all network devices on the VPN restore connection with the exception of the 3102 phones.  they need to be rebooted to reestablish connection to the NCP

 

another observation: when an IP phone on a VPN is disconnected from the network the logging starts and doesn't stop until (they are reconnected?).

 

 I get this over and over and over, 100 mb worth.  

0331:002510:0115 Dnld           W fnTimeOut: Resending data packet MAC 00:e0:bb:22:41:15                                                                 
0331:002510:0115 Dnld           W fnTimeOut: State 1 - Operation 1001 - next state 1                                                                     
0331:002511:0153 Dnld           W fnWarn: Received Download Me in State 1 Resetting Session                                                              
0331:002514:0211 Dnld           W fnWarn: State 0 - Event 1001 - Resetting Session                                                                       
0331:002516:0288 H3LinkLayer    E
IP sendto() call failed, returnStatus = 0xffffffff          (LOTS OF THIS)                                                         
0331:002520:0384 H3LinkLayer    E
IP sendto() call failed, returnStatus = 0xffffffff                                                                   
0331:002520:0384 Dnld           W fnTimeOut: Resending data packet MAC 00:e0:bb:22:41:15                                                                 
0331:002520:0384 Dnld           W fnTimeOut: State 1 - Operation 1001 - next state 1                                                                     
0331:002521:0423 Dnld           W fnWarn: Received Download Me in State 1 Resetting Session                                                              
0331:002524:0480 Dnld           W fnWarn: State 0 - Event 1001 - Resetting Session                                                                       
0331:002526:0557 H3LinkLayer    E
IP sendto() call failed, returnStatus = 0xffffffff

1 REPLY
merlin215
Valued Contributor

Re: IP Phone on VPN loses connection = IP sendto() call failed, returnStatus = 0xffffffff

How many devices are doing this ? Seems odd that this is occurring at that amount  of errors .

 

V5000 running 6_0_63 code

I am getting excessive (?) logging when an IP phone loses connection to the network.  I am getting Megabytes of logging...I am guessing the excessive logs caused a system lockup at one point.

The VPN comes back up (in 2 - 10mintues) and all network devices on the VPN restore connection with the exception of the 3102 phones.  they need to be rebooted to reestablish connection to the NCP

 

another observation: when an IP phone on a VPN is disconnected from the network the logging starts and doesn't stop until (they are reconnected?).

 

 

sounds like there is a connection timing issue on the VPN .