IP Telephony - NBX
cancel
Showing results for 
Search instead for 
Did you mean: 

NBX R6.0 Configure a "relay" trunk to trunk

rlaniel
Occasional Visitor

NBX R6.0 Configure a "relay" trunk to trunk

I don't know how to name this, but what I would like to do is to have a way for an outside caller to dial in our NBX, enter a special code and then have access to an outside line. A kind of relay trunk to trunk.



I know there are risk to this as it could lead to toll fraud, but I want to know if it's possible and how to implement it.



Thanks.
1 REPLY
merlin_1
Super Advisor

Re: NBX R6.0 Configure a "relay" trunk to trunk

What you are asking for is disa . Direct Inward System Access . The NBX does not support this in any way shape or form , You are on your own . However , from setting up an AA ( putting in a number to a hunt group fwding , there are a few ways to do this . See 3KB as I believe there was a doc written about this a while back . You can also set up to dial an internal number and get to a trunk group

You are correct as we do not support this in any way shape or form .