Segeration of one line

[Jeremey.Peck]

I have an NBX V5000.  We have 2 businesses set up in the same building about one of the bussiness has it's own phone line and number.  I want to make sure that when the dial out they are using their phone line and not the one's from the rest of the business's.  I have already mapped the line to the phone via a button on the phone but the line still shows up when you press 9 to dial out from the other side of the bussiness.  Do you have any suggestions ??

Thank you in advance.

Jeremey

[donbru01]

Hi , yes it's possibile see example :

- Create Table 1 where 9-xxxxxxx  goto route 2

- Create route 2 goto to extension *0002

- Create Table 5 where 9-xxxxxx goto route 10

- Create route 10 goto extension *0010

Via netset /dialPlan /extension list

- configure in *0002 line used from Customer "A"

- configure in *0010 line used from Customer "B"

Via netset /dialplan/Table

- configure User Customer "A" into table 1

- configure User Customer "B" into table 5

When User Customer "A"  dial 9-xxxxx dialplan route call towards Route 2 -- Extension List *0002 -- Line xxx

When User Customer "B" dial 9-xxxxx dialplan route call towards Route 10 --Extension List *0010 --Line yyy

Thanks