IP Telephony - NBX
cancel
Showing results for 
Search instead for 
Did you mean: 

nbx v3000 +nbx 100 with t1

agraham
Occasional Contributor

nbx v3000 +nbx 100 with t1

I have an older nbx 100, and im trying to know if adding a v3000 module running 5.1.22 will work with a nbx 100 running 4.1.xx



As i need to keep the t1 module for my voice circuits thats in the nbx100



 



 



Thanks



-Andrew



1 REPLY
merlin_1
Super Advisor

Re: nbx v3000 +nbx 100 with t1

 



 



I have an older nbx 100, and im trying to know if adding a v3000 module running 5.1.22 will work with a nbx 100 running 4.1.xx






 



As i need to keep the t1 module for my voice circuits thats in the nbx100



 



It depends how you arr using the units as you do not say ,.



 



VTL's form different subnets ?



Using both NBX'es in the same subnet ?



 



If you are using the same systems in the same network , I caution you as you will run into issues .  You can but they can create problems on the network for the tels , ie pick an nboss , meaning that the tels may discover at the wrong NBX  .



If it were me , I would try to use the V3000 system and convert the NBX 100 tio a chassis only using an NBX  hub card .



 



1. Remove the db from the NBX 100 and install it into the V3000 ( making sure licenses are ok - enough device , tel  licenses etc . also ,  memory  )



2. Run the V3000 system and use the NBX 100 chassis with a hub card installed and run the T1 off the mian NBX . You can find a hub card probably form any reseller out there  , not that expensive .