IP Telephony - VCX
Showing results for 
Search instead for 
Do you mean 

FAX on VCX V7111 analog FXS to NBX E1/ISDN line

Occasional Advisor

FAX on VCX V7111 analog FXS to NBX E1/ISDN line

[ Edited ]

Hi, I have NBX V3001R running software ver. 6_5_22, with chassis and E1/ISDN line. I want to connect FAX machines to this NBX. I used to do that by ATA, but now the ATA is discontinued and End-Of-Sale. I am looking at alternatives. I read somewhere that the VCX V7111 Analog FXS gateway may meet my requirement provided that the NBX is working in SIP mode. I read the manual of VCX V7111, and was looking for FAX support information. I read it supports the T.38 for Fax over IP, but not sure how this will inter-communicate with the NBX system. I am confused about how the final setup should be. The NBX has a chassis with E1 (PRI ISDN) card. I need the analog fax machines connected to the VCX V7111, to be able to send and receive faxes over the E1/ISDN line. Can somebody help with configuration guidlines to acheive that. Has anyone made similar setup? Really in need for a solution.

P.S. Same question I have posted under NBX Board