Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
IP Telephony - VCX
cancel
Showing results for 
Search instead for 
Did you mean: 

Telephone Interface to P.A.

SOLVED
Go to solution
KnoxPhoneMan
Occasional Contributor

Telephone Interface to P.A.

I understand that to interface the VCX to a P.A. such as that used in schools one has to use a Line Isolation Transformer connected to a FXS. Can anyone recommend a Line Isolator or interface device that has successfully connected the VCX to a PA? I would be interested to know how this has been done by others and what devices they have used.

1 REPLY
Highlighted
hermimi2
Occasional Contributor
Solution

Re: Telephone Interface to P.A.

We have our Telecor PA system going through our FXS. It works great. Create a phone extension in the VCX for the PA system. In the gateway assign the extension to the channel you are going to use. Plug an analog phone line into the gateway channel and into the card on the paging system.