Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

Clone B2600 System to C3600

efirkey
Advisor

Clone B2600 System to C3600

Is it possible to use an ignite backup image to copy my entire B2600 system to a C3600 workstation?  I have tried and run into issues with the machine paths not being the same.

 

Thank you.

 

 

P.S. This thread has been moved from Workstations - Itanium-Based, hp9000, Visualize to HP-UX > ignite. - Hp Forum Moderator

1 REPLY
Robert_Jewell
Honored Contributor

Re: Clone B2600 System to C3600

Did you try booting into interactive mode?  you can then setup the disk configuration manually and that would help with the pathing issues.

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!