Ignite-UX

Do I need to run make_config? "There is no software fitting..."

 
SOLVED
Go to solution
dictum9
Super Advisor

Do I need to run make_config? "There is no software fitting..."

I am not sure if I need to create a depot. I am trying to clone a system. It's 11.23.

Booting off an Ignite server,I get this:


ERROR: There is no software fitting the Core-OS requirements selected for
loading. There must be a software selection (sw_sel) using a software
source (sw_source) with a load_order=0 selected. Check the server's
configuration files. If VUE or CDE has been selected, then verify
that a language has also been chosen.



Here are some config files I have, scanning them time and again and nothing is seen wrong.


cat /var/opt/ignite/INDEX

cfg "HP-UX B.11.11 Default" {
description "Default system configuration that HP supplies for the B.11.11 release."
"/opt/ignite/data/Rel_B.11.11/config"
"/opt/ignite/data/Rel_B.11.11/hw_patches_cfg"
"/var/opt/ignite/config.local"
}
cfg "HP-UX B.11.23 Default ac2opdb" {
description "11.23 system configuration ac2opdb"
"/opt/ignite/data/Rel_B.11.23/config"
"/var/opt/ignite/data/Rel_B.11.23/core_archive.cfg"
"/var/opt/ignite/config.local"
}
cfg "HP-UX B.11.31 Default" {
description "system configuration that HP supplies for the B.11.31 release."
"/opt/ignite/data/Rel_B.11.31/config"
"/opt/ignite/data/Rel_B.11.31/hw_patches_cfg"
"/var/opt/ignite/data/Rel_B.11.31/core_cfg"
"/var/opt/ignite/config.local"
}
4 REPLIES 4
dictum9
Super Advisor

Re: Do I need to run make_config? "There is no software fitting..."

Here is core_archive.cfg
Scot Bean
Honored Contributor
Solution

Re: Do I need to run make_config? "There is no software fitting..."

So far you have shown us a default INDEX file and a default config file.

You say you want to clone a system. How? Have you already made an image that you want to clone?
Steven E. Protter
Exalted Contributor

Re: Do I need to run make_config? "There is no software fitting..."

Shalom,

Have you done an swcopy of a Core OS DVD that you wish to base your image on?

Or have you done a make_net_recvoery or make_tape_recovery upon wish you wish to base an image.

The principle of Ignite is to create a template upon which you wish to build other systems.

The goal at present is ill defined. What do you want to accomplish?

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
dictum9
Super Advisor

Re: Do I need to run make_config? "There is no software fitting..."

I got it resolved, I ran make_sys_image and apparently I do not need to run make_config