Ignite-UX

Failed Installation of Ignite UX Version B.3.3

 
SOLVED
Go to solution
fg_1
Trusted Contributor

Failed Installation of Ignite UX Version B.3.3

Can anyone provide me with an alternate location to obtain this version of Ignite-UX, it seems that anytime I download it from the software depot site I am getting the following corruption messages when installing it.


Installing bundle "Ignite-UX-11-00,r=B.3.3.116" .
WARNING: Ignoring unknown keyword "hp_mfg" at line 389.
* Installing fileset "Ignite-UX.BOOT-KERNEL,r=B.3.3.116" (1 of
8).
ERROR: The internal uncompress routine has detected corruption while
decompressing to file "/opt/ignite/boot/INSTALL" which has
compression type "gzip".
ERROR: tar: /tmp/ignite11_11.00.tar : This doesn't look like a tar
archive
ERROR: tar: /tmp/ignite11_11.00.tar : Skipping to next file...
ERROR: The file "/opt/ignite/boot/INSTALLFS" was not loaded because
it is missing from the source media.
ERROR: The file "/opt/ignite/boot/VINSTALL" was not loaded because it
is missing from the source media.
ERROR: The file "/opt/ignite/boot/WINSTALL" was not loaded because it
is missing from the source media.
ERROR: The file "/opt/ignite/boot/boot_lif" was not loaded because it
is missing from the source media.
ERROR: Internal error. The directory "/opt/ignite/data" is missing
from the source media. It was not loaded. This error
occurred in function "idam_FinishTapeItem", source file
"id_ser.c", line 4355. Please give this information to your
Hewlett-Packard support contact.
ERROR: The file "/opt/ignite/data/INSTCMDS" was not loaded because it
is missing from the source media.
ERROR: The file "/opt/ignite/data/RECCMDS" was not loaded because it
is missing from the source media.
ERROR: Failed installing fileset "Ignite-UX.BOOT-KERNEL,r=B.3.3.116".
Check the above output for details.
* Retry number 1 of 1 for loading files for fileset
"Ignite-UX.BOOT-KERNEL,r=B.3.3.116".
WARNING: Ignoring unknown keyword "hp_mfg" at line 389.
* Installing fileset "Ignite-UX.BOOT-KERNEL,r=B.3.3.116" (1 of
8).
ERROR: tar: /tmp/ignite11_11.00.tar : This doesn't look like a tar
archive
ERROR: tar: /tmp/ignite11_11.00.tar : Skipping to next file...
ERROR: The file "/opt/ignite/boot/INSTALLFS" was not loaded because
it is missing from the source media.
ERROR: The file "/opt/ignite/boot/VINSTALL" was not loaded because it
is missing from the source media.
ERROR: The file "/opt/ignite/boot/WINSTALL" was not loaded because it
is missing from the source media.
ERROR: The file "/opt/ignite/boot/boot_lif" was not loaded because it
is missing from the source media.
ERROR: Internal error. The directory "/opt/ignite/data" is missing
from the source media. It was not loaded. This error
occurred in function "idam_FinishTapeItem", source file
"id_ser.c", line 4355. Please give this information to your
Hewlett-Packard support contact.
ERROR: The file "/opt/ignite/data/INSTCMDS" was not loaded because it
is missing from the source media.
ERROR: The file "/opt/ignite/data/RECCMDS" was not loaded because it
is missing from the source media.
ERROR: Failed installing fileset "Ignite-UX.BOOT-KERNEL,r=B.3.3.116".
Check the above output for details.
NOTE: The Install Phase has suspended. Check the above output for
reasons.


* Aborting the Install Phase.

======= 09/17/01 10:44:35 EDT END install AGENT SESSION (Aborted)
(pid=12146) (jobid=mmdcux10-0059)


======= 09/17/01 10:44:38 EDT BEGIN install AGENT SESSION (pid=12206)
(jobid=mmdcux10-0059)

* Agent session started for user "root@MMDCUX10.chsli.org".
(pid=12206)

======= 09/17/01 10:44:41 EDT END install AGENT SESSION (Cancelled)
(pid=12206) (jobid=mmdcux10-0059)
10 REPLIES 10
James R. Ferguson
Acclaimed Contributor

Re: Failed Installation of Ignite UX Version B.3.3

Hi Frank:

I presume that you have, but make sure that you have specified a binary transfer.

Regards!

...JRF...
fg_1
Trusted Contributor

Re: Failed Installation of Ignite UX Version B.3.3

Yes I did. I tried it 3 times, each time I got the same size file.
John Bolene
Honored Contributor

Re: Failed Installation of Ignite UX Version B.3.3

I downloaded it a week ago and did not have any problems installing it.
It is always a good day when you are launching rockets! http://tripolioklahoma.org, Mostly Missiles http://mostlymissiles.com
Patrick Wallek
Honored Contributor

Re: Failed Installation of Ignite UX Version B.3.3

Can you give details (an ls -l) of the file you downloaded?

Here's an ll from mine.
-rw-rw-r-- 1 root sys 42776605 Apr 30 11:02 ignite11_11i_B.3.3.116.tar.gz
-rw-rw-r-- 1 root sys 25398558 Apr 30 10:09 ignite_10.20_A.3.3.116.tar.gz

Do you have someplace I could ftp the file to you?
fg_1
Trusted Contributor

Re: Failed Installation of Ignite UX Version B.3.3

Patrick

Here it is.

-rw-rw-rw- 1 root sys 41460978 Sep 17 10:02 ignite11_11.00.tar

Just to let you know, I am downloading it from the www.software.hp.com site, then it comes to my pc as a winzip file. Once downloaded, I then FTP it to my unix box. Then try to install it, I am thinking that I am missing a step along the way?.


Patrick Wallek
Honored Contributor

Re: Failed Installation of Ignite UX Version B.3.3

I just downloaded the same file you did, only I did it directly to my HP-UX box.

Here's the details:

-rw-rw-r-- 1 root sys 42424320 Sep 17 11:27 ignite11_11.00_B.3.3.116.tar

The file you are getting looks to be a little short in the byte count.

I just installed Ignite from the file I downloaded (above) and it installed successfully.
fg_1
Trusted Contributor

Re: Failed Installation of Ignite UX Version B.3.3

how do you do it directly to your box? I am not working from a console.
John Bolene
Honored Contributor

Re: Failed Installation of Ignite UX Version B.3.3

I downloaded it from the HP browser window to my PC, then ftp'd it to the UNIX machine.
It is always a good day when you are launching rockets! http://tripolioklahoma.org, Mostly Missiles http://mostlymissiles.com
Patrick Wallek
Honored Contributor
Solution

Re: Failed Installation of Ignite UX Version B.3.3

OK. I think I've figured out how you can download the software from your HP-UX box, assuming you can get out to the Internet.

ftp to software.hp.com
login as anonymous
e-mail address as password
cd to /dist/swdepot
bin
get ignite11_11.00.tar

It may be a bit slow, but you should, hopefully get the file. It should be the size I referenced in my post above.