Operating System - HP-UX
1748158 Members
4041 Online
108758 Solutions
New Discussion

HOw to install the make_tape_recovery in our HP 11 i V3 server

 
SOLVED
Go to solution
paramanandam jala
Occasional Advisor

HOw to install the make_tape_recovery in our HP 11 i V3 server

 make_tape_recovery -x inc_entire=vg00
sh: make_tape_recovery:  not found.
#
# make_tape_recovery -x inc_entire=vg00
sh: make_tape_recovery:  not found.
# man make_tape_recovery
No manual entry for make_tape_recovery.

 

Pl. help us to  create the ignite backup.

 

regards,

Anand,

Microcare computers,

09849914779.

4 REPLIES 4
Patrick Wallek
Honored Contributor
Solution

Re: HOw to install the make_tape_recovery in our HP 11 i V3 server

Go here to download the software:

http://h71028.www7.hp.com/enterprise/w1/en/os/hpux11i-system-management-ignite-ux.html?jumpid=ex_r1533_us/en/large/tsg/go_ignite-ux

 

Once you have downloaded it and copied it to your HP-UX server install it using the 'swinstall' command.

paramanandam jala
Occasional Advisor

Re: HOw to install the make_tape_recovery in our HP 11 i V3 server

Downloaded the software and installed , but make_tape_recovery    giving the following error .

 

# make_tape_recovery -A -v -a /dev/rmt/24mn
sh: make_tape_recovery:  not found.
#

 

Pl. Help us create the tape.

 

REGARDS,

ANAND

 

Dennis Handly
Acclaimed Contributor

Re: How to install the make_tape_recovery in our HP 11.31 server

>Downloaded the software and installed but make_tape_recovery giving the following error .

>sh: make_tape_recovery:  not found.

 

Did you log back in so that your $PATH was updated after swinstall?

vishnu.khandare
Respected Contributor

Re: How to install the make_tape_recovery in our HP 11.31 server

Hi,

 

Is ignite installed, check by,

#swlist | grep -i ignite

 

If found installed, run

#whereis make_tape_recovery

 

and take full path and run the cmd to take ignite.

 

 

Regards

Vishnu

You should deserve before U desire!!!!