Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Ignite-UX
cancel
Showing results for 
Search instead for 
Did you mean: 

HOw to install the make_tape_recovery in our HP 11 i V3 server

SOLVED
Go to solution
paramanandam jala
Occasional Advisor

HOw to install the make_tape_recovery in our HP 11 i V3 server

 make_tape_recovery -x inc_entire=vg00
sh: make_tape_recovery:  not found.
#
# make_tape_recovery -x inc_entire=vg00
sh: make_tape_recovery:  not found.
# man make_tape_recovery
No manual entry for make_tape_recovery.

 

Pl. help us to  create the ignite backup.

 

regards,

Anand,

Microcare computers,

09849914779.

4 REPLIES
Patrick Wallek
Honored Contributor
Solution

Re: HOw to install the make_tape_recovery in our HP 11 i V3 server

Go here to download the software:

http://h71028.www7.hp.com/enterprise/w1/en/os/hpux11i-system-management-ignite-ux.html?jumpid=ex_r1533_us/en/large/tsg/go_ignite-ux

 

Once you have downloaded it and copied it to your HP-UX server install it using the 'swinstall' command.

paramanandam jala
Occasional Advisor

Re: HOw to install the make_tape_recovery in our HP 11 i V3 server

Downloaded the software and installed , but make_tape_recovery    giving the following error .

 

# make_tape_recovery -A -v -a /dev/rmt/24mn
sh: make_tape_recovery:  not found.
#

 

Pl. Help us create the tape.

 

REGARDS,

ANAND

 

Dennis Handly
Acclaimed Contributor

Re: How to install the make_tape_recovery in our HP 11.31 server

>Downloaded the software and installed but make_tape_recovery giving the following error .

>sh: make_tape_recovery:  not found.

 

Did you log back in so that your $PATH was updated after swinstall?

Highlighted
vishnu.khandare
Respected Contributor

Re: How to install the make_tape_recovery in our HP 11.31 server

Hi,

 

Is ignite installed, check by,

#swlist | grep -i ignite

 

If found installed, run

#whereis make_tape_recovery

 

and take full path and run the cmd to take ignite.

 

 

Regards

Vishnu

You should deserve before U desire!!!!