HP-UX ignite-ux

 
SOLVED
Go to solution
Isaac_4
Frequent Advisor

HP-UX ignite-ux

I have an error when trying to make a recovery tape with the IGNITE-UX
the error is related with the filesystem of /,
The type divice file used according to the bdf and the one shown in /etc/fstab is different
I verify some things in this respect:
Filesystem used in the /etc/fstab
/dev/vg00/lvol3 / vxfs delaylog 0 1
Root Filesystem reported as the command bdf
/dev/root 86016 28018 54432 34% /
I need to force to the operating system to use the divice file indicated in /etc/fstab

 

P.S. This thread has been moved from Disk to HP-UX > ignite. -HP Forum Moderator

The time is gold
2 REPLIES 2
Michael Tully
Honored Contributor
Solution

Re: HP-UX ignite-ux

Hi,

For starters this needs to be corrected before
you can cut an ignite tape. Suggest you look at
the following information on how it is fixed.

http://us-support2.external.hp.com/cki/bin/doc.pl/sid=4899e9f11dc3c772fb/screen=ckiDisplayDocument?docId=200000049506990

http://us-support2.external.hp.com/cki/bin/doc.pl/sid=4899e9f11dc3c772fb/screen=ckiDisplayDocument?docId=200000027709102

This second document probably will fix it.

The best way to cut an ignite tape is the following
# /opt/ignite/bin/make_tape_recovery -x inc_entire=vg00 -I -v -a /dev/rmt/0mn

HTH
-Michael
Anyone for a Mutiny ?
Denver Osborn
Honored Contributor

Re: HP-UX ignite-ux

To resolve, remove the mnttab file and recreate it.

# rm /etc/mnttab
# mount -v

If you don't want to remove it and recreate, then vi it. change /dev/root to /dev/vg00/lvol3 and verify it's right with bdf.

Hope this helps
-denver