Operating System - HP-UX
1748165 Members
4389 Online
108758 Solutions
New Discussion

HPUX 11.00: Ignite UX 4.1.61 "make_recovery" , "make_tape_recovery" Running Very Slow

 
SOLVED
Go to solution
LG Porter
Frequent Advisor

Re: HPUX 11.00: Ignite UX 4.1.61 "make_recovery" , "make_tape_recovery" Running Very Slow

FYI...This problem has been replicated in the HP Labs and is presently being reviewed by the Ignite-UX backlevel team....At this moment, Ignite-UX has been upgraded to the latest version and the only way that "make_recovery" will complete in a reasonble time is to use the "make_recovery -Av" ...without the "C" (checksum option)....
Susan Clow
New Member

Re: HPUX 11.00: Ignite UX 4.1.61 "make_recovery" , "make_tape_recovery" Running Very Slow

Hi Folks, This is a FYI:
We have setup a rp5430 server in the last month, & we're using version Ignite-UX B.4.3.91 running the backup to a DLT8000;

Command being used:
make_tape_recovery -Av -a /dev/rmt/0mn -B $TEMP_DIR/uxinstlf.recovery -x exclude=/concrcv -x exclude=/us3 -x exclude=/us6 > $WORK_DIR/make_recovery.log.$STAMP 2>&1

At first I thought this was a bit slow, but after reading this forum & comparing the new os being 3.5 gig vs 1 gig for 10.20, suggests to me that 2 hours is pretty good throughput.

Thanks Folks