Operating System - HP-UX
1753637 Members
5975 Online
108798 Solutions
New Discussion юеВ

Re: I had to eneable inbuilt lan but now i have another problem

 
yatin
Frequent Advisor

I had to eneable inbuilt lan but now i have another problem

I get following output
Booting...
Cannot find ENTRY_TEST.

Failed to initialize.

ENTRY_INIT
Status = -7

00000000 00000000 00000800 09FD0C4A 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0000000B 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000009 8400800C 00000000 00000000 080009FD 0C4A0000 00000000

Failed to initialize.
2 REPLIES 2
Mel Burslan
Honored Contributor

Re: I had to eneable inbuilt lan but now i have another problem

ENTRY_INIT Status = -7 usually means "can not find boot device" which means either your boot disk bit the dust or OS got corrupted.
Check to see if you can boot off from a core-os CD or ignite tape and see the drive as you are installing a new system. If the root disk is not showing up, it means you have a bad hardware. If it shows up, it may indicate a corrupt disk, in which case a fresh OS reload may fix your problem.

Hope this helps
________________________________
UNIX because I majored in cryptology...
Mel Burslan
Honored Contributor

Re: I had to eneable inbuilt lan but now i have another problem

I realized you placed this under ignite-ux section. If this error was encountered while using a bootable backup tape (BBT), there is a strong possibility that your BBT is corrup and it is a very common incidence. Try getting a new BBT under these circumstances.
________________________________
UNIX because I majored in cryptology...