I want to build a Ignite server for HP UX Version 11.V3 system.

[paramanandam jala]

I want to build a Ignite server for HP UX Version 11.V3  system. Can anynody share the step by step setup guide. I don't need any HP Official doc which I already have.

Pl. help us configure the Ignite Server.   regards,

Anand, Microcare

[Ralf Seefeldt]

The Document, you added, should suffice. I succeeded with these steps.
Be sure to export your ignite directory to everyone writable.
The IP-Range for ignite must be reachable without crossing a router.

Do you have any errormessages or are you still in the state of planing?

Bye
Ralf

[Chirag Parikh]

Hi,

Find the summarized steps in short.

1.mkdir /var/opt/ignite/recovery
2.create a filesystem of req size and mount on /var/opt/ignite/recovery
3.cd /var/opt/ignite/recovery
mkdir archives
4.chown to bin:bin
5.run /opt/ignite/bin/ignite
it will display a window
6.select server setup
7.configure booting ip address --- next
8.use unsed ip in ur nw
9.selct skip dhcp setup -- next--ok
10.selct skip depot config ---next
11 yes =------ finish
12.in /etc/rc.config.d/nfsconf

Thanks & Regards,

Chirag Parikh