Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Ignite-UX
cancel
Showing results for 
Search instead for 
Did you mean: 

I want to build a Ignite server for HP UX Version 11.V3 system.

paramanandam jala
Occasional Advisor

I want to build a Ignite server for HP UX Version 11.V3 system.

I want to build a Ignite server for HP UX Version 11.V3  system. Can anynody share the step by step setup guide. I don't need any HP Official doc which I already have.

Pl. help us configure the Ignite Server.   regards,

Anand, Microcare

2 REPLIES
Ralf Seefeldt
Valued Contributor

Re: I want to build a Ignite server for HP UX Version 11.V3 system.

The Document, you added, should suffice. I succeeded with these steps.
Be sure to export your ignite directory to everyone writable.
The IP-Range for ignite must be reachable without crossing a router.

Do you have any errormessages or are you still in the state of planing?

Bye
Ralf
Highlighted
Chirag Parikh
Frequent Advisor

Re: I want to build a Ignite server for HP UX Version 11.V3 system.

Hi,

 

Find the summarized steps in short.

 

1.mkdir /var/opt/ignite/recovery
2.create a filesystem of req size and mount on /var/opt/ignite/recovery
3.cd /var/opt/ignite/recovery
mkdir archives
4.chown to bin:bin
5.run /opt/ignite/bin/ignite
it will display a window
6.select server setup
7.configure booting ip address --- next
8.use unsed ip in ur nw
9.selct skip dhcp setup -- next--ok
10.selct skip depot config ---next
11 yes =------ finish
12.in /etc/rc.config.d/nfsconf

 

Thanks & Regards,

Chirag Parikh