Iginte Warning message

[M.Thomas]

Hi Admins ,
I am getting following warning message while doing ignite backup .

pax: write : I/O error
pax: A write error has occurred.
WARNING: The pax command returned a non-zero exit status (exit status 1)
* Creation of system archive complete

* Cleaning up old configuration file directories

======= 04/20/07 10:48:52 MST make_tape_recovery completed with warnings


Please suggest me what to do.


Thanks & Regards
Thomas.M

[spex]

Thomas,

We really don't have much to go on here, as the information you provided is minimal. Obviously, there was a write error. It could have been caused by a defective tape, defective hardware, exceeding the tape's capacity, or by something else altogether.

PCS

[M.Thomas]

Hi ,
here i attaching recovery.log file

[Marcel Burggraeve]

Looking at that logfile it seems loads of disks have 'disappeared' from your configuration.
The disks being used for vg03, vg04 and vg05 which should be at hardware path c27 and c30 are gone.
I wouldn't be surprised if that was the cause for your problem.

[M.Thomas]

Hi All,

Thanks for your response


Thanks&regards
Thomas.M