Ignite B.3.6.82

[Rodolphe]

Hello,
I want to install Ignite B.3.6.82 .
Must I remove Ignite B.3.3.116 from my server before, or not ?
Do I need special patches for this version ?

thanks for your help.

[Clemens van Everdingen]

Hi,

You do not have to remove the previous version.
Install the latest pax patch.
PHCO_25418 for 11.00
PHCO_25393 for 11.11
PHCO_20388 for 10.20

Suc6.
C.

[John Carr_2]

Hi

and this is where you can get it from

http://europe-support.external.hp.com/wpsl/bin/doc.pl/screen=wpslSrchHPUXpatches/sid=a90876b70d9c95e5a5?OS=HP-UX

cheers
John.

[Rodolphe]

Must i remove from my system Ignite B.3.3.116 or not ?

[John Carr_2]

Hi

I personally would not patch if I had the latest version of s/w.

it would be advisable to remove the old s/w as you have no use for it there after.

you dont have to remove it but its the best way.
cheers
John.

[Clemens van Everdingen]

Hi,

To be sure:
1. remove the old version
2. Install the latest version
3. Check for the latest pax patch.

Following these steps you have for sure a working situation.

C.

[John Carr_2]

Hi

and this is where you get the s/w from if you dont have the latest version.

http://www.software.hp.com/products/IUX/download.html


cheers
John.