BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
Showing results for 
Search instead for 
Do you mean 

Ignite Booting Problem

Frequent Advisor

Ignite Booting Problem

[ Edited ]

Hi i am able to take the ignite backup of the client through Ignite server. But whe i go to restore through ignite server it failed by giving below error

 


#vparboot -p WMSDB01 -I 172.22.7.221,/opt/ignite/boot/Rel_B.11.23/WINSTALL

 

vparboot: Booting WMSDB01.  Please wait...
vparboot: unable to boot WMSDB01: Unable to receive install file from host "172.22.7.221".

 

 

# tftp 172.22.7.221
tftp> get /opt/ignite/boot/nbp.efi /tmp/nbp.efi
Transfer timed out.

tftp> exit

 

On server 172.22.7.221

# cat /etc/inetd.conf | grep -i tftp
tftp        dgram  udp  wait   root /usr/lbin/tftpd    tftpd -l /opt/ignite     /var/opt/ignite

 

1 REPLY
Highlighted
Acclaimed Contributor

Re: Ignite Booting Problem

[ Edited ]

This looks like you are trying to boot an Integrity server using the PA-RISC method.

Better read the chapter

"Ignite-UX, the LAN, the LAN card, and vparboot -I"

and

"Installing vP ars with Ignite-UX on Integrity"

in the admin guide.

Consider to use "vpardbprofile" or use

 

# vparboot -p <target_partition> -I [ [-d dbprofile_name]| [-s
ignite_ux_server_ip [-c client_ip -g gateway_ip -m subnet_mask] -b boot_file [-o
optional_data]]]

 

example:

vparboot -p keira2 -I -s 17.2.165.152 -c 17.2.163.92 -g
17.2.165.240 -m 255.255.248.0 -b /opt/ignite/boot/nbp.efi -o
IINSTALL

 

or

 

# vparboot -p keira2 -I


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!