Operating System - HP-UX
1748060 Members
5535 Online
108758 Solutions
New Discussion юеВ

Ignite Disk Detection on Integrity Server

 
SOLVED
Go to solution
ignite_ux
New Member

Ignite Disk Detection on Integrity Server

I am going to install HP-UX 11i v2 on rx6600. server but at the begining stage of intallation of Ignite-UX it cannot detect any hard disks, while i am using SAS controller equiped with two 146GB hard disks.
already i have updated the SAS firmware and EFI driver and created an IM Array with RAID (without Global Spare) as well.
PLEASE URGENT HELP.
5 REPLIES 5
Torsten.
Acclaimed Contributor
Solution

Re: Ignite Disk Detection on Integrity Server

What release date of your install media?
It needs to be at least sept. 06 to support this hardware.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ignite_ux
New Member

Re: Ignite Disk Detection on Integrity Server

dear

the media version is B.11.23 June 2006. and this is the original media shipped with the Server. so do you think that i should prepare a new one?
Torsten.
Acclaimed Contributor

Re: Ignite Disk Detection on Integrity Server

You are right, it is the june release,
http://docs.hp.com/en/5991-5311/ch02s03.html

Check your RAID config again.
What RAID controller do you have?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ignite_ux
New Member

Re: Ignite Disk Detection on Integrity Server

OH, You were right. as you suggested i obtained sep-06 release DVD package of HP-UX and easily could find the SAS disks.
Thanks a lot.
ignite_ux
New Member

Re: Ignite Disk Detection on Integrity Server

This Thread closed successfully :)