Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
cancel
Showing results for 
Search instead for 
Did you mean: 

Ignite Rebuild Kernel

Highlighted
Abhijeet
Occasional Contributor

Ignite Rebuild Kernel

Hi

 

I am igniting source ignite image on different hardware ( both model are rp8420 ) as part of hardware change.

 

I have  added couple of drivers ( scsi320 , IEther-00 , which are created using make_config ) along with source image image  for hardware compatiable on new server.

 

Installation get successful.  Additional driver also get installed as part of installation.

 

Though  I can't see kernel get rebuild during this process.  This causing  server panic during boot.

 

Install log  shows

 

 

       * Build_Kernel:  Begin

 

NOTE:    Since the /stand/vmunix kernel is already in place, the kernel will

         not be re-built. Note that no mod_kernel directives will be processed.

 

 

       * Build_Kernel:  Complete

 

 

 

       * Boot_From_Client_Disk:  Begin.

 

 

Does any way to rebuild kernel as part ignite installation when additional drivers also installed.

 

Thanks

 

Abhijeet Durugkar