Ignite-UX

Re: Ignite Server insallation Pending after failed installation.

 
gigiz
Valued Contributor

Ignite Server insallation Pending after failed installation.

Hi,
i have installed an Ignite Server on itanium.
I tryed to recovery by make_net_recovery by using a gui . This recovery has filed but by GUI i see the process in a pending state.
I tryed to Stop the installation but i can't.
I tryed to reinstall but i have a message: Client is not ready to install yet !
I want to know if exist a command or a procedure to reset a failed installation pending and restart a new installation
3 REPLIES 3
Albert_31
Trusted Contributor

Re: Ignite Server insallation Pending after failed installation.

there is no direct procedure to kill/reset a failed installation.

a) ps -ef | grep -i make

see if you find make_sys_image and similiar commands running and kill them.

b) check for this file
/var/tmp/ign_configure/make_sys_image_flag

This has the process id of the command make_sys_image, you need to remove this file as well.

regards
albert

Scot Bean
Honored Contributor

Re: Ignite Server insallation Pending after failed installation.

It sounds like you are trying to control the install just from the Ignite server GUI.

Grab the target's console, and see what happened, what is going on there.
gigiz
Valued Contributor

Re: Ignite Server insallation Pending after failed installation.

ok