1752662 Members
5384 Online
108788 Solutions
New Discussion юеВ

Ignite-UX - LIF error

 
SOLVED
Go to solution
bill_allen
Frequent Advisor

Ignite-UX - LIF error

I am having some difficulty with Ignite-UX on a HP-UX 11.00 system. I believe I am running the current version of the product for the OS, but I am getting the following output when I run make_tape_recovery. Any help would be appreciated.

=========================

* Creating local directories for configuration files and archive.

======= 10/16/07 09:41:49 CDT Started make_tape_recovery. (Tue Oct 16
09:41:49 CDT 2007)
@(#)Ignite-UX Revision C.7.3.148
@(#)ignite/net_recovery (opt) Revision:
/branches/IUX_RA0709w/ignite/src@71360 Last Modified: 2007-08-24
09:42:50 -0600 (Fri, 24 Aug 2007)

* Testing for necessary pax patch.
NOTE: Detected entries in the defaults file at
/var/opt/ignite/recovery/defaults.

* Checking Versions of Ignite-UX filesets
* Creating System Configuration.
* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2007-10-16,09:41/system_cfg vg00
* Backing Up Volume Group /dev/vg00
* /usr/sbin/vgcfgbackup /dev/vg00
* Creating Map Files for Volume Group /dev/vg00
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

* Backing Up Volume Group /dev/vg01
* /usr/sbin/vgcfgbackup /dev/vg01
* Creating Map Files for Volume Group /dev/vg01
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg01.mapfile /dev/vg01

* Creating Control Configuration.
* Creating Archive File List
* Creating Archive Configuration

* /opt/ignite/lbin/make_arch_config -c
/var/opt/ignite/recovery/2007-10-16,09:41/archive_cfg -g
/var/opt/ignite/recovery/2007-10-16,09:41/flist -n 2007-10-16,09:41 -r
pa -b 64 -d Recovery\ Archive -t 1 -i 1 -m t
* Saving the information about archive to
/var/opt/ignite/recovery/previews
* Creating The Tape Archive
make_medialif: ERROR: Unsupported local system OS release value ("B.11.00"); no "/opt/ignite/boot/Rel_B.11.00" directory exists on this system. Either that release is not supported by Ignite-UX or the needed install kernel and RAM file system files are not installed on this system. Invoke "make_medialif -?" for a usage summary.

======= 10/16/07 09:43:39 CDT make_tape_recovery completed unsuccessfully
ERROR: System Error, /opt/ignite/bin/make_medialif failed creating boot LIF
file.
ERROR: Failed to generate LIF on tape.
4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: Ignite-UX - LIF error

Did you get the ignite version from here?

https://h20392.www2.hp.com/portal/swdepot/try.do?productNumber=IGNITEUXB

There is no 11.00 support included.

You need ignite for 11.00.

unfortunately 11.00 is out of support - do you still have the install media?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
bill_allen
Frequent Advisor

Re: Ignite-UX - LIF error

Yes, I sure did get it from there. I think I can find some 11.00 media. Install from the Application disk?
Peter Leddy_1
Esteemed Contributor

Re: Ignite-UX - LIF error

Yes you should find it on one of the application cd's.
bill_allen
Frequent Advisor

Re: Ignite-UX - LIF error

Thanks for the help. I am making a Ignite recovery image right now. Life is good again!