Operating System - HP-UX
1753797 Members
7675 Online
108805 Solutions
New Discussion юеВ

Ignite-UX and Solaris Jumpstart

 
Michael Moore_1
Occasional Contributor

Ignite-UX and Solaris Jumpstart

Environment is mainly Solaris. We use the Jumpstart tool to load all SUN servers. Begun project to implement Ignite for HP systems. Does anyone have documentation that compares the two? Or how I can transfer knowledge and experience with Jumpstart to Ignite-UX?
4 REPLIES 4
Jeff_Traigle
Honored Contributor

Re: Ignite-UX and Solaris Jumpstart

The best source of information for Ignite-UX is the Ignite-UX Administration Guide available from http://docs.hp.com/.
--
Jeff Traigle
Steven E. Protter
Exalted Contributor

Re: Ignite-UX and Solaris Jumpstart

The products are very different from each other.

Ignite has the following areas of focus:

1) Create a DR image tape or cd bootable
2) Create a golden image usable for system replication.
3) New System Install Interface
4) Create network DR images specific to the server that created the image.

By reading the documents in post 1, you'll see the similarities and differences between Solaris and Ignite.

As far as skill transfer, I would not count on that, but reading the document will give you an idea.

The best way to go is book a course at http://education.hp.com in Ignite and then you'll learn the product very well and be able to get the job done.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Robert-Jan Goossens
Honored Contributor

Re: Ignite-UX and Solaris Jumpstart

Hello Michael,

I use both ignite as jumstart in our environment. It would be impossible to compare these two products, but they have similarities.

Ignite creates an bootable image from the current OS and stores it on a tape or server for recreation and restore facilities.

Ignite server can also be setup like Jumstart to create lan based installs over a network. You can copy install cd's to the ignite server (multiple hp os versions like jumpstart) in combination with other software.

Check below link for more info, on the right side there is a list with FAQ's, overview etc.

http://www.software.hp.com/products/IUX/index.html

Best regards,
Robert-Jan
Sanjay_6
Honored Contributor

Re: Ignite-UX and Solaris Jumpstart

Hi,

Maybe you can start with ignite faq at this link,

http://www.software.hp.com/products/IUX/index.html

and this from hp doc site,

http://docs.hp.com/hpux/onlinedocs/B2355-90837/B2355-90837.html

Hope this helps.

Regds