Ignite across platforms

[Susan Prosser]

Please save me from the man pages!!!

We have various HP's D/R/K/A/L classes on 10.20 and 11.00, 32 and 64 bit. Can I create an Ignite Server such that I can install onto all these servers. Or am I limited by these differences??

I have manaed to create depots for 11 and 10.2 but have varying success when trying to add client servers via the Ignite GUI

TIA

[Paula J Frazer-Campbell]

Kevin

Ignite server is just a storage platform for images and should not cause any problems.




see man make_net_recovery.


HTH

Paula

[RAJESH GANGADHARAN]

since you got HPUX 11, u need to install IGNITE Unix 11 (fm application media of HP UX 11), so that u can use the same server for bothe HP UX 11 and HP UX 10.20

U can create different images for HP UX 10.20 and HP UX 11.
the same image can be used for HP UX 11 32 bit as well as 64 bit

[Bill McNAMARA_1]

yes there's no problem doing that.

You need to d/l the all in one ignite package, and patch the clients appropriately, but after that it'll work no problem.

Get the ignite11_ALL from:

http://www.software.hp.com/products/IUX/download.html

Later,
Bill

[Clemens van Everdingen]

Hi,

You will have to download the latest Ignite version from this link:

http://www.software.hp.com/products/IUX/download.html

Intended for all hp-ux 10.20/11.0/11i systems
(67 MB download)
(100 MB installed)

Then you have an installation suitable for installing and recovering all platforms.

C.

[Kenny Chau]

Please go to this link for information:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x40908cc5e03fd6118fff0090279cd0f9,00.html

Regards,
Kenny.