Ignite backup failure :The make_sys_image command failed. The system recovery archive will

[dskrao]

ERROR: The make_sys_image command failed. The system recovery archive will
not be created.
* Creating local directories for configuration files and archive.

======= 06/27/05 09:54:18 EDT Started /opt/ignite/bin/make_tape_recovery.
(Mon Jun 27 09:54:18 EDT 2005)
@(#) Ignite-UX Revision B.4.4.29
@(#) net_recovery (opt) $Revision: 10.611 $

* Testing pax for needed patch
* Passed pax tests.
* Recovery Archive Description = Recovery Archive

* Recovery Archive Location = /dev/rmt/1mn

* Number of Archives to Save = 2

* Pax type = tar


* Preparing to create a system archive

* Archiving contents of wctst2 via tar image to local device/dev/rmt/1mn.
* Creation of system archive complete
NOTE: The following files are in the list of files that were on the
system, but they are no longer present. These files are not
included in the back-up:
/var/tmp/ign_configure/make_sys_image.log

WARNING: There was a problem with the list of files/directories to archive.
Input: /var/opt/ignite/recovery/2005-06-27,09:54/flist
The following line(s) had too few/incorrect entries in each of them.
Problem lines:
line: 58 opt/ptc/Windchill626/bin/|/opt/hpws/apache/bin/rotatelogs 40755 1119767553 96 0

======= 06/27/05 11:36:58 EDT make_tape_recovery completed unsuccessfully

[Steven E. Protter]

See about deleting the file being referred to. Make a backup.

You may have bad entries in the flist.

Your version of Ignite is slighly out of date and an upgrade to v 6 might help.

I'd like a look at this file:

/var/tmp/ign_configure/make_sys_image.log


SEP

[Robert-Jan Goossens]

Check this line, and check if this file including the special character (|) exists

opt/ptc/Windchill626/bin/|/opt/hpws/apache/bin/rotatelogs

Regards,
Robert-Jan