Operating System - HP-UX
1745877 Members
3951 Online
108723 Solutions
New Discussion юеВ

Ignite clients hangs at analysis phase

 
Prashanth_13
Occasional Visitor

Ignite clients hangs at analysis phase

I have installed HPUX 11.23 V2 with Ignite 6.7.79 on rx1600. I try to deploy 11.23 on to rx2620, rp3440 and rp3410 it hangs in analysis phase. It is hanging when it says 'reading source for file information'. The clients boot to lan, fetches network information from dhcp/bootptab and mounts nfs with out any error.

Any tips to get arround this issue would help.
2 REPLIES 2
Steven E. Protter
Exalted Contributor

Re: Ignite clients hangs at analysis phase

Shalom,

I would suspect a methodology issue here.

1) The only way to make this work is to do an Ignite Golden Image. make_net_recovery and make_tape_recovery images will fail because of hardware differences.

http://docs.hp.com/en/B2355-90997/ch07.html

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Prashanth_13
Occasional Visitor

Re: Ignite clients hangs at analysis phase

Would you suggest reinstalling Ignite and its depots for this issue. I do not want to use gold image as it might not install the software post OS install.

Thanks,
Prashanth