Re: Ignite error

 
Michael Selvesteen_2
Trusted Contributor

Ignite error

Folks,

I am trying to install HP-UX B.11.23 on an Itaniaum box, through the golden image. From my box when I enforce my booting process to contact the ignite server, I encounter the following error,

* Releasing DHCP allocated IP address...
* Bringing up Network (lan0)
add net default: gateway 172.16.1.10
* Reading configuration information from server...

* NFS mounting clients directory.
* Using client directory: /var/opt/ignite/clients/0x00306EF38C05

ERROR: The version of Ignite-UX on the server you are using (C.6.1.44) is
different than the version of Ignite-UX that the client booted
(B.5.0.35). The versions must match in order to ensure correct
behavior. You may need to update the device you booted from with the
components found on the server.
Continuing the installation with a server version mismatch is likely
to cause indeterminate problems. Do you want to continue anyway? (y/[n]): y

* Checking configuration for consistency...

* Loading configuration user interface, please wait...
ERROR: Could not read /opt/ignite/data/INSTCMDSIA from install tftp server.
ERROR: Tar: blocksize = 0; broken pipe?
ERROR: File: /usr/ccs not found.
ERROR: File: /usr/obam not found.
ERROR: File: /usr/lib/nls not found.
ERROR: File: /usr/lib/hpux32/aries32.so not found.
ERROR: File: /usr/lib/hpux32/pa_boot32.so not found.
ERROR: File: /usr/lib/libdld.2 not found.
ERROR: File: /usr/lib/dld.sl not found.
ERROR: File: /usr/lib/libc.2 not found.
ERROR: File: /usr/lib/hpux32/libCsup.so.1 not found.
ERROR: File: /usr/lib/hpux32/libCsup.so not found.
ERROR: File: /usr/lib/hpux32/libstd.so.1 not found.
ERROR: File: /usr/lib/hpux32/libstream.so.1 not found.
ERROR: File: /usr/lib/hpux32/libunwind.so.1 not found.
ERROR: File: /usr/lib/hpux32/libuca.so.1 not found.
ERROR: File: /usr/lib/hpux32/libm.so.1 not found.
ERROR: File: /opt/ignite/bin not found.
ERROR: File: /opt/ignite/ui not found.
ERROR: File: /opt/ignite/help not found.
* tftp error log follows:
tftp> tftp> tftp> tftp> tftp> Error code 1: File not found
tftp>
loadfile command failed, retry? ([y]/n): n
ERROR: Could not load in user interface from media
NOTE: System rebooting...



How to overcome this problem. Also please expalin the nesscessary steps for successfully installing 11.23 on a itanium server using the golden image.

Thanks for the help.
3 REPLIES 3
Rita C Workman
Honored Contributor

Re: Ignite error

Well nobody has touched this one, so maybe if I throw something out here, other smarter folks will add something...

I don't have an Itanium box, and I don't do too much with Golden Image.
But....it is obvious that the versions of Ignite between the two boxes you are working with are different.
So to get you started, why not upgrade your Ignite so your at the same level on both boxes and then retry. (At least till someone else pipes in).

Rgrds,
Rita
Devesh Pant_1
Esteemed Contributor

Re: Ignite error

It seems that the ignite version is the first hurdle that you would want to remove. Please have the client and the server brought up to the same rev before creating the golden image. As Rita has already pointed out.

I had hit something similar ( not with Itanium) and ignite version was the first thing that I had to take care of.
thanks
Devesh
Michael Selvesteen_2
Trusted Contributor

Re: Ignite error

Thank you all for the comments. I solved the problem in other way by installing the OS from the ignite server. It worked perfectly.