Ignite-UX

Ignite from N class to rp8400 (HPUX 11i)

 
hp_user_1
Regular Advisor

Ignite from N class to rp8400 (HPUX 11i)

Hi,

I have just ignited an rp8400 from an N class server. None of the par* commands seemed to be working now on the new rp8400. Please advise. I used 'make_tape_recovery -I -v -x inc_entire=vg00'

Thanks
4 REPLIES 4
Sridhar Bhaskarla
Honored Contributor

Re: Ignite from N class to rp8400 (HPUX 11i)

Hi,

Try reconfiguring the partitionManager product.

swconfig -x reconfigure=true PartitionManager

See if it works then.

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
hp_user_1
Regular Advisor

Re: Ignite from N class to rp8400 (HPUX 11i)

I have just added hd_fabric to the system file, compiled the kernel and rebooting it. I believe this would solve the issue.

Thanks
harry d brown jr
Honored Contributor

Re: Ignite from N class to rp8400 (HPUX 11i)

And then install the LATEST hardware patches, and the latest OS bundle!.

live free or die
harry
Live Free or Die
Vincente Fernandes
Valued Contributor

Re: Ignite from N class to rp8400 (HPUX 11i)

make sure that vpmon is present in /stand. Did you boot the server using "hpux /stand/vpom" at the ISL prompt? Do an swlist and grep for "Partition Manager". It should display somewhat like below and atleast have the 2 below packages.
B6826AA B.11.11.01.05 Partition Manager - HP-UX
T1335AC A.02.01.00 HP-UX Virtual Partitions
VPARMGR B.11.11.01.01 Virtual Partition Manager - HP-UX