Re: Ignite hangs at save_config

 
ShreeS
Advisor

Ignite hangs at save_config

Hi all,

I have N-4000 rp7400 running HP-UX 11.00.

When I run "make_tape_recovery" command it hangs at "save_config" for Ignite-UX B.3.7.

Recently I upgrade with Ignite-UX c.7.2 but, the status of make_tape-recovery is same.

# make_tape_recovery -x inc_entire=vg00
* Creating local directories for configuration files and archive.

======= 11/22/07 05:09:49 CST Started make_tape_recovery. (Thu Nov 22
05:09:49 CST 2007)
@(#)Ignite-UX Revision C.7.2.94
@(#)ignite/net_recovery (opt) $Revision: 10.882 $ $Date: 2007/02/28
17:10:48 $

* Testing for necessary pax patch.
* Checking Versions of Ignite-UX filesets
* Creating System Configuration.
* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2007-11-22,05:09/system_cfg vg00

2 REPLIES 2
Fabian Briseño
Esteemed Contributor

Re: Ignite hangs at save_config

Hello shreekanth.

do an ioscan on your hardware to see if anything is in a NO_HW state that could be one reason.

check you /var/adm/syslog/syslog.log file for any error messages.





remember to award point for helpfull answers.
Knowledge is power.
whiteknight
Honored Contributor

Re: Ignite hangs at save_config

Hi Srikant,

The save_config command is used to validate the hardware configuration and disk
layout of the system. One of the commands it uses is /usr/sbin/lssf.
The lssf command is linked to /sbin/mksf, and (in this case) was
found to be defective, so a working version was copied over from another 11.0
system and relinked to /sbin/mksf, rmsf and insf commands. The symbolic link
to /usr/sbin/lssf was also verified.

To see exactly where save_config is failing, this command can be used:

# sh -x /opt/ignite/bin/save_config > /tmp/save_config.out 2>&1

if we cannot see anything from this save_config.out file, my suggestion please log case to HP for help.

WK
Problem never ends, you must know how to fix it