Ignite on VxVM

[CharliePuyol]

I can't make a make_tape_recovery on a system that is full VxVM, what can I do?

lifls(open): No such device or address
lifls: Can't list /dev/dsk/c0t5d0; file not opened
WARNING: /dev/dsk/c0t5d0 is not a LIF volume.
No LIF files on the boot disk will be archived.
Check /stand/bootconf, man bootconf(4), and /dev/dsk to
ensure that the bootconf file is set up correctly.
WARNING: The make_sys_image failed to save the LIF volume.
* Creating System Configuration.
* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2008-04-24,10:31/system_cfg rootdg
/opt/ignite/bin/save_config[115]: pathCnt > 1 : The specified number is not valid for this command.
lssf: /dev/dsk/c3t8d0: No such file or directory
save_config: Error - unknown disk type for /dev/dsk/c3t8d0, not SCSI or HPFL
awk: Cannot find or open file /var/tmp/swapinfo.tmp.
The source line number is 1.
awk: Cannot find or open file /var/tmp/swapinfo.tmp.
The source line number is 1.
save_config: Error - cannot determine primary swap size
ERROR: /opt/ignite/bin/save_config failed

======= 04/24/08 10:31:21 SAT make_tape_recovery completed unsuccessfully

[YAQUB_1]

Hi,

Can U send "ioscan -fnC tape" out put & which command U execute make_tape_recovery...

[Mridul Shrivastava]

Have a look at the following doc:

http://www5.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062910622

Document description: Ignite: make_tape_recover returns error "save_config failed"
Document id: KBRC00010161

You need to have support contract with HP to view the above doc.