1748266 Members
3527 Online
108760 Solutions
New Discussion

Re: Ignite restoration

 
Vengat
Advisor

Ignite restoration

Hi Team,

                I have built Ignite server. And added clients now I able to take backup using ignite. But I don’t know how to restore operating system through ignite server

 

Ignite server Operating system: HP-UX 11.31

Ignite server Model: rx6600

 

Client server Operating system: - HP-UX 11.31

Client server Model: -  9000/800/rp3440

 

Kindly advice how to restore Operating system through ignite server.

3 REPLIES 3
Patrick Wallek
Honored Contributor

Re: Ignite restoration

Documentation is the best place to start:

 

Ignite-UX Administration Guide (B3921-90070, March 2012)

Check chapters 9, 10 and 15 of the above document.

 

Successful System Recovery using Ignite-UX

Successful System Cloning using Ignite-UX

pradeep m
Respected Contributor

Re: Ignite restoration

You can also refer the HP Ignite-UX Guided Troubleshooting from the below link which has the step by step instructions for most common configuration and troubleshooting.

 

Click here to view HP Ignite-UX Guided Troubleshooting

 

From the above link, go to "Configuration / How-To Guide" -> Choose "System Recovery" -> Choose "Ignite-UX Network Recovery" to view the steps to perform a network recovery from Ignite-UX server. 

 

To access all other available HP Guided Troubleshooting guides, visit: www.hp.com/support/hpgt and choose the appropriate products.

Regards,
Pradeep

I am an HP Employee
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details


Arockiasamy K
Frequent Advisor

Re: Ignite restoration

Plz check this document.

Regards,
Arockiasamy K