HPE Community
Operating System - HP-UX
1753797 Members
7168 Online
108799 Solutions
New Discussion юеВ

Ignite server on different subnet

 
Vishu
Trusted Contributor

тАО09-09-2010 05:11 AM

тАО09-09-2010 05:11 AM

Ignite server on different subnet

Hi Guys,

I have to install one vpar. My vpar is on the submet 10.26.8.0 but my ignite server is on the subnet 10.26.120.0.

I issued the command from other Vpar as

# vparboot -p -I

It is asking for desired LAN to continue. Kindly suggest, will my LAN on this subnet be able to find the ignite server on the subnet specified above and proceed with the installation? or is there anything else required to be done at server or ignite server side?

Thanks
Vishu
0 Kudos
Reply
4 REPLIES 4
Torsten.
Acclaimed Contributor

тАО09-09-2010 05:16 AM

тАО09-09-2010 05:16 AM

Re: Ignite server on different subnet

If this is an Integrity server, have a look at "vpardbprofile".

In case of HP9000 server you need a boot helper.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Vishu
Trusted Contributor

тАО09-09-2010 05:22 AM

тАО09-09-2010 05:22 AM

Re: Ignite server on different subnet

Yes, this is an integrity server.

How do i check vpardbprofile and what need to be checked in it.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО09-09-2010 05:34 AM

тАО09-09-2010 05:34 AM

Re: Ignite server on different subnet

# man vpardbprofile

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Vishu
Trusted Contributor

тАО09-09-2010 12:35 PM

тАО09-09-2010 12:35 PM

Re: Ignite server on different subnet

Torsten,

Thanks for showing the path. I would be glad if you can tell me how would i create and use this dbprofile to install OS on 2nd Vpar.

Please guide me thoroughly.

Thanks in advance!!!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.