Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Ignite-UX
cancel
Showing results for 
Search instead for 
Did you mean: 

Issue with system image recovery with ignite C.7.17.361

Issue with system image recovery with ignite C.7.17.361

Hello ,

 

I am trying to restore the system image (hp-ux 11iv3 March 2013) using  ignite C.7.17.361 but continously getting errors:

 

       * Using client directory: /var/opt/ignite/clients/0x0017087C8828
       * Checking configuration for consistency...
       * The config files being used do not specify which LVM volume group
         versions are supported. Regenerate config files using make_config,
         make*recovery (or by adding _hp_provides_LVM_vg_vers to golden-image
         config files).  Otherwise, Ignite-UX will default to support only LVM
         volume group version "1.0".
ERROR:   The total volume sizes in disk group: "rootdg" exceed the available
         capacity by 53652Mb.  For more information run "instl_dbg -D
         <clientdir> -d".
ERROR:   The disk capacity available is not sufficient to create the volume
         "**/**/**" with the size specified (disk space is short by
         200Mb). Reduce the size of this volume (or other volumes that share
         the same disk group), or use additional/larger disks. For more
         information run "instl_dbg -D <clientdir> -d".

 

and on executing instl_dbg got below output.

 

# instl_dbg -D /var/opt/ignite/clients/myserver -d
======= Disk and Volume allocation ======
  Mount          Size     Usage     Disk /       impact      amount
Directory        (Mb)               Group      (MB /  %)    shy (Kb)
----------------------------------------------------------------------
/stand           1740     HFS       rootdg       0   0%        0
(swap_dump)      4096     SWAP_DUMP rootdg       0   0%        0
/                1024     VxFS      rootdg       0   0%        0
/mydir         8192     VxFS      logdg        0   0%        0
/cache/db/db01   3072     VxFS      logdg        0   0%        0
/cache/db/db02   3072     VxFS      logdg        0   0%        0
/cache/db/db03   3072     VxFS      logdg        0   0%        0
---

----

----

--- so on.

 

I am assured that my INDEX and system.cfg files are ok as they use to work with ignite 7.14 and 11iv3 earlier OS version.

 

Note: The system image is from the same server where i am putting it back.

It seems its not being able to clear rootdg so giving disk space issues error.

Could any one help whats wrong with igniite or configuration/settings needs changes.

 

 

Thanks,

AbhishekJ

 

 

P.S. This thread has been moved from HP-UX > System Administration to ignite. - HP Forum Moderator

1 REPLY
Highlighted

Re: Issue with system image recovery with ignite C.7.17.361

 

any expert comments on above issue would be very useful.

 

 

Thanks

AbhishekJ