BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
Showing results for 
Search instead for 
Do you mean 

Make_recovery error

SOLVED
Go to Solution

Make_recovery error

I issuse this command:

/opt/ignite/bin/make_recovery -A -v -d /dev/rmt/2mn

I receive this error message:

make_recovery(486): Call to system failed. errno=0 Cleanup

Thanks for the help.

I like UNIX
5 REPLIES
Occasional Visitor

Re: Make_recovery error

Check /var/opt/ignite/logs/makrec.log1 and makrec.log2 for more details. The -v switch shows some detail, but you'll find more information in the log files.
Acclaimed Contributor

Re: Make_recovery error

Willie:

See document #KBRC00002923, contents as follow:

CONFIGURATION HP-UX 10.x, 11.x Product: Ignite/UX

RESOLUTION

make_recovery (486): call to system failed. errno=0 cleanup

Look in /var/opt/ignite/logs/makrec.log1
and see if the vgcfgbackup step fails with a similar error msg:

vgcfgbackup: /etc/lvmtab is out of date with the running kernel:

Kernel indicates 7 disks for /dev/vg02 and /etc/lvmtab has 6 disks. Cannot proceed with backup...

# strings /etc/lvmtab -- make sure all of the disks that are supposed to be in the VG are there.

/dev/vg00
/dev/dsk/c0t5d0
/dev/dsk/c0t9d0
/dev/vg01
/dev/dsk/c0t11d0
/dev/vg02
/dev/dsk/c0t8d0
/dev/dsk/c0t10d0

# strings /etc/lvmconf/vg02.conf - make sure the current vgcfgbackup is accurate with all the correct disks.

To fix the problem do:

# vgreduce -f /dev/vg02 # gets info out of kernel
# mv /etc/lvmtab /etc/lvmtab.old # move corrupted BUT important file
# vgscan -v # creates new clean lvmtab
# vgcfgbackup /dev/vg02 # backup the data for vg02

There should be no errors with vgcfgbackup.

Rerun make_recovery and it should run now without errors.

...JRF...

Re: Make_recovery error

Here is the message from the log file.

vgcfgbackup: Invalid LVMREC on Physical Volume /dev/rdsk/c7t0d1

should I still follow this steps to fix this.
I like UNIX
Acclaimed Contributor

Re: Make_recovery error

Willie:

Please post (attach) the 'strings' output from the /etc/lvmtab and /etc/lvmconf/ files. A 'vgdisplay -v' for each volume group is handy, too.

...JRF...
Highlighted

Re: Make_recovery error

James here is the info you requested.

Thanks Willie Wright
I like UNIX