Operating System - HP-UX
1748060 Members
5876 Online
108758 Solutions
New Discussion юеВ

Not able to restore from Ignite Tape

 
Sunil Astekar
New Member

Not able to restore from Ignite Tape

We have RX6600 server with HP-UX 11.23, I am trying to restore OS from Ignite Tape,
When archiving is completed, its giving the following error...

Ignite-UX krs_registry_merge load registry file failed:
/stand/krs/system.krs (17)
NOTE: Since the /stand/vmunix kernel is already in place, the kernel will
not be re-built. Note that no mod_kernel directives will be processed.
* Build_Kernel: Warning
* Boot_From_Client_Disk: Begin
* Rebooting machine as expected.
NOTE: Rebooting system.



Please revert as soon as possible, its critical

Thanks
Sunil Astekar
5 REPLIES 5
V. Nyga
Honored Contributor

Re: Not able to restore from Ignite Tape

Hi,

for me it doesn't look like an error ... it's just a note, that 'the kernel will
not be re-built.'
Are you running any scripts in or after ignite?

Is the server not booting correctly after this message?

V.
*** Say 'Thanks' with Kudos ***
Sunil Astekar
New Member

Re: Not able to restore from Ignite Tape

Yes Nyga,

You are right, server is not booting.
"Rebooting server" is the last message what I am able to see.
If I go to VFP in console, status is "OS shutting Down"

If I power off and power on the server...
Its coming and stopping at " Booting Kernel..

Patrick Wallek
Honored Contributor

Re: Not able to restore from Ignite Tape

What type of server was the Ignite tape created on?

If the server is too different it is entirely possible to see what you are seeing.
Torsten.
Acclaimed Contributor

Re: Not able to restore from Ignite Tape

>> Its coming and stopping at " Booting Kernel..



Have you seen this server working before?


I ask, because if your are on the wrong console this is the last message you will see during a boot.


What console you are using (serial/VGA)?

What is the setting?

EFI> conconfig

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Deeos
Regular Advisor

Re: Not able to restore from Ignite Tape

Hi,

Have you used same ignite tape for the same server or not?


2. After rebooting machine, what message you are getting for kernel?


3. or have you tried to boot with backup kernel

hpux>boot /stand/backup/vmunix



The error is probably resolve after do that.



Regards
Deeos




Deepak