Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Ignite-UX
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with Ignite installation

VtoK
Occasional Advisor

Problem with Ignite installation

Hello everybody!

 

I have a problem while installing Ignite. Does anybody have an idea? See log below:

 

==========================================

bash-3.2# swinstall -s /oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot IGNITE

======= 11/11/11 17:18:08 WST BEGIN swinstall SESSION
(non-interactive) (jobid=gcrmdbt01-0068)

* Session started for user "root@gcrmdbt01".

* Beginning Selection
* Target connection succeeded for "gcrmdbt01:/".
* Source:
/oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot

* Targets: gcrmdbt01:/
* Software selections:
IGNITE,r=C.7.13.259,a=HP-UX_B.11.00_32/64,v=HP
Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-KRN-11-31,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-SERVICES,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-DOC,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-SRC,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-DOC,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-SRC,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.FILE-SRV-11-31,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNITE,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-ENG-A-MAN,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-E-MAN,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-S-MAN,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.MGMT-TOOLS,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.RECOVERY,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
* Selection succeeded.


* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
* "gcrmdbt01:/": 1 filesets have the selected revision already
installed.
ERROR: "gcrmdbt01:/": The software dependencies for 2 products or
filesets cannot be resolved.
* "gcrmdbt01:/": 1 bundles have the selected revision already
installed.
* The analysis phase failed for "gcrmdbt01:/".
ERROR: "gcrmdbt01:/": 4 filesets were determined to be skipped in
the analysis phase.
WARNING: "gcrmdbt01:/": 1 configure or unconfigure scripts had
warnings.
ERROR: "gcrmdbt01:/": An update to the installed product database or
depot catalog may have errors.
* The execution phase failed for "gcrmdbt01:/".
* Analysis and Execution had errors.


ERROR: More information may be found in the agent logfile using the
command "swjob -a log gcrmdbt01-0068 @ gcrmdbt01:/".

======= 11/11/11 17:18:37 WST END swinstall SESSION (non-interactive)
(jobid=gcrmdbt01-0068)

==========================================

 

# swjob -a log gcrmdbt01-0068 @ gcrmdbt01:/
======= 11/11/11 09:18:08 GMT BEGIN install AGENT SESSION (pid=12093)
(jobid=gcrmdbt01-0068)

* Agent session started for user "root@gcrmdbt01.intra".
(pid=12093)

* Beginning Analysis Phase.
* Source:
gcrmdbt01.intra:/oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot

* Target: gcrmdbt01:/
* Target logfile: gcrmdbt01:/var/adm/sw/swagent.log
* Reading source for product information.
NOTE: The fileset "Ignite-UX.MGMT-TOOLS,r=C.7.13.259" is already
installed. If you wish to reinstall this fileset, change the
"reinstall" option to "true".
* Reading source for file information.
* The installed fileset
"Ignite-UX.BOOT-KRN-11-23,l=/,r=C.7.5.142" requires the
fileset "Ignite-UX.BOOT-COMMON-IA,l=/,r=C.7.5.142" as a
corequisite. The new version of the corequisite,
"Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259", does not satisfy the
dependency.
ERROR: The dependencies for fileset
"Ignite-UX.BOOT-KRN-11-23,l=/,r=C.7.5.142" cannot be resolved
(see previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
* The installed fileset
"Ignite-UX.BOOT-KRN-11-11,l=/,r=C.7.5.142" requires the
fileset "Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.5.142" as a
prerequisite. The new version of the prerequisite,
"Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259", does not satisfy the
dependency.
ERROR: The dependencies for fileset
"Ignite-UX.BOOT-KRN-11-11,l=/,r=C.7.5.142" cannot be resolved
(see previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
* Executing preDSA command.
NOTE: The used disk space on filesystem "/" is estimated to increase
by 8 Kbytes.
This will leave 729536 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/opt" is estimated to
increase by 377080 Kbytes.
This will leave 3246896 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/var" is estimated to
increase by 368 Kbytes.
This will leave 8071400 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/usr" is estimated to
increase by 80 Kbytes.
This will leave 1387912 Kbytes of available user disk space
after the installation.
NOTE: The bundle "IGNITE,r=C.7.13.259" is already installed. If you
wish to reinstall this bundle, change the "reinstall" option
to "true".

* Summary of Analysis Phase:
ERROR: Exclude Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259
ERROR: Exclude Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259
ERROR: 2 of 17 filesets had Errors.
* 1 of 17 filesets will be Skipped.
* 14 of 17 filesets had no Errors or Warnings.
ERROR: The Analysis Phase had errors. See the above output for
details.


* Beginning the Install Execution Phase.
* Filesets: 14
* Files: 385
* Kbytes: 375273
* Installing fileset "Ignite-UX.BOOT-KRN-11-31,r=C.7.13.259" (1
of 14).
* Installing fileset "Ignite-UX.BOOT-SERVICES,r=C.7.13.259" (2
of 14).
* Installing fileset "Ignite-UX.CD-TOOLS,r=C.7.13.259" (3 of
14).
* Installing fileset "Ignite-UX.CD-TOOLS-DOC,r=C.7.13.259" (4 of
14).
* Installing fileset "Ignite-UX.CD-TOOLS-SRC,r=C.7.13.259" (5 of
14).
* Installing fileset "Ignite-UX.DVD-TOOLS,r=C.7.13.259" (6 of
14).
* Installing fileset "Ignite-UX.DVD-TOOLS-DOC,r=C.7.13.259" (7
of 14).
* Installing fileset "Ignite-UX.DVD-TOOLS-SRC,r=C.7.13.259" (8
of 14).
* Installing fileset "Ignite-UX.FILE-SRV-11-31,r=C.7.13.259" (9
of 14).
* Installing fileset "Ignite-UX.IGNITE,r=C.7.13.259" (10 of 14).
* Installing fileset "Ignite-UX.IGNT-ENG-A-MAN,r=C.7.13.259" (11
of 14).
* Installing fileset "Ignite-UX.IGNT-JPN-E-MAN,r=C.7.13.259" (12
of 14).
* Installing fileset "Ignite-UX.IGNT-JPN-S-MAN,r=C.7.13.259" (13
of 14).
* Installing fileset "Ignite-UX.RECOVERY,r=C.7.13.259" (14 of
14).

* Beginning the Configure Execution Phase.
WARNING: Fileset: "Ignite-UX.BOOT-COMMON-IA" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.BOOT-COMMON-PA" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.BOOT-KRN-11-11" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.BOOT-KRN-11-23" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.FILE-SRV-11-11" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.FILE-SRV-11-23" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
NOTE: The definition of user "tftp" exists and will not
be duplicated.
WARNING: The "configure" script for "Ignite-UX" had a warning (exit
code "2"). The script location was
"/var/tmp/BAA012093/catalog/Ignite-UX/pfiles/configure".
* This script had warnings but the execution of this product
will still proceed. Check the above output from the script
for further details.
NOTE: A new version of "/var/opt/ignite/server/ignite.defs" has been
installed on the system.
ERROR: Could not select the software
"Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP".
This software does not exist in the target. You must specify
either the correct target, or the correct software selections.
NOTE: The command "/usr/sbin/swmodify" exited with a status code of
"1". The following is the output from the command:
ERROR: Could not select the software
"Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP".
This software does not exist in the target. You must specify
either the correct target, or the correct software selections.
NOTE: End of command output. Non-zero exit status may or may not be
a failure. Look for additional messages.
ERROR: The swmodify command failed for
Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP.
The configuration process will proceed.
ERROR: Rebuilding the Installed Products Database has failed. You
may need to retry this operation.

* Summary of Execution Phase:
ERROR: Skipped (in analysis) Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259
ERROR: Skipped (in analysis) Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259
ERROR: 2 of 17 filesets had Errors.
* 1 of 17 filesets were Skipped.
* 14 of 17 filesets had no Errors or Warnings.
ERROR: The Execution Phase had errors and warnings. See the above
output for details.


======= 11/11/11 09:18:37 GMT END install AGENT SESSION (pid=12093)
(jobid=gcrmdbt01-0068)
#

==========================================

vatless
8 REPLIES
Torsten.
Acclaimed Contributor

Re: Problem with Ignite installation

ERROR: "gcrmdbt01:/": The software dependencies for 2 products or
filesets cannot be resolved
see the log for details
swjob -a log gcrmdbt01-0068 @ gcrmdbt01:/

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
VtoK
Occasional Advisor

Re: Problem with Ignite installation

# swjob -a log gcrmdbt01-0068 @ gcrmdbt01:/
======= 11/11/11 09:18:08 GMT BEGIN install AGENT SESSION (pid=12093)
(jobid=gcrmdbt01-0068)

* Agent session started for user "root@gcrmdbt01.intra".
(pid=12093)

* Beginning Analysis Phase.
* Source:
gcrmdbt01.intra:/oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot

* Target: gcrmdbt01:/
* Target logfile: gcrmdbt01:/var/adm/sw/swagent.log
* Reading source for product information.
NOTE: The fileset "Ignite-UX.MGMT-TOOLS,r=C.7.13.259" is already
installed. If you wish to reinstall this fileset, change the
"reinstall" option to "true".
* Reading source for file information.
* The installed fileset
"Ignite-UX.BOOT-KRN-11-23,l=/,r=C.7.5.142" requires the
fileset "Ignite-UX.BOOT-COMMON-IA,l=/,r=C.7.5.142" as a
corequisite. The new version of the corequisite,
"Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259", does not satisfy the
dependency.
ERROR: The dependencies for fileset
"Ignite-UX.BOOT-KRN-11-23,l=/,r=C.7.5.142" cannot be resolved
(see previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
* The installed fileset
"Ignite-UX.BOOT-KRN-11-11,l=/,r=C.7.5.142" requires the
fileset "Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.5.142" as a
prerequisite. The new version of the prerequisite,
"Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259", does not satisfy the
dependency.
ERROR: The dependencies for fileset
"Ignite-UX.BOOT-KRN-11-11,l=/,r=C.7.5.142" cannot be resolved
(see previous lines).
You must resolve the above dependencies before operating on
this fileset or change the "enforce_dependencies" option to
"false".
* Executing preDSA command.
NOTE: The used disk space on filesystem "/" is estimated to increase
by 8 Kbytes.
This will leave 729536 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/opt" is estimated to
increase by 377080 Kbytes.
This will leave 3246896 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/var" is estimated to
increase by 368 Kbytes.
This will leave 8071400 Kbytes of available user disk space
after the installation.
NOTE: The used disk space on filesystem "/usr" is estimated to
increase by 80 Kbytes.
This will leave 1387912 Kbytes of available user disk space
after the installation.
NOTE: The bundle "IGNITE,r=C.7.13.259" is already installed. If you
wish to reinstall this bundle, change the "reinstall" option
to "true".

* Summary of Analysis Phase:
ERROR: Exclude Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259
ERROR: Exclude Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259
ERROR: 2 of 17 filesets had Errors.
* 1 of 17 filesets will be Skipped.
* 14 of 17 filesets had no Errors or Warnings.
ERROR: The Analysis Phase had errors. See the above output for
details.


* Beginning the Install Execution Phase.
* Filesets: 14
* Files: 385
* Kbytes: 375273
* Installing fileset "Ignite-UX.BOOT-KRN-11-31,r=C.7.13.259" (1
of 14).
* Installing fileset "Ignite-UX.BOOT-SERVICES,r=C.7.13.259" (2
of 14).
* Installing fileset "Ignite-UX.CD-TOOLS,r=C.7.13.259" (3 of
14).
* Installing fileset "Ignite-UX.CD-TOOLS-DOC,r=C.7.13.259" (4 of
14).
* Installing fileset "Ignite-UX.CD-TOOLS-SRC,r=C.7.13.259" (5 of
14).
* Installing fileset "Ignite-UX.DVD-TOOLS,r=C.7.13.259" (6 of
14).
* Installing fileset "Ignite-UX.DVD-TOOLS-DOC,r=C.7.13.259" (7
of 14).
* Installing fileset "Ignite-UX.DVD-TOOLS-SRC,r=C.7.13.259" (8
of 14).
* Installing fileset "Ignite-UX.FILE-SRV-11-31,r=C.7.13.259" (9
of 14).
* Installing fileset "Ignite-UX.IGNITE,r=C.7.13.259" (10 of 14).
* Installing fileset "Ignite-UX.IGNT-ENG-A-MAN,r=C.7.13.259" (11
of 14).
* Installing fileset "Ignite-UX.IGNT-JPN-E-MAN,r=C.7.13.259" (12
of 14).
* Installing fileset "Ignite-UX.IGNT-JPN-S-MAN,r=C.7.13.259" (13
of 14).
* Installing fileset "Ignite-UX.RECOVERY,r=C.7.13.259" (14 of
14).

* Beginning the Configure Execution Phase.
WARNING: Fileset: "Ignite-UX.BOOT-COMMON-IA" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.BOOT-COMMON-PA" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.BOOT-KRN-11-11" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.BOOT-KRN-11-23" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.FILE-SRV-11-11" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
WARNING: Fileset: "Ignite-UX.FILE-SRV-11-23" (rev=C.7.5.142) is a different
version than the rest of Ignite-UX (rev=C.7.13.259). You must
update all filesets of the product to the same version for
proper behavior.
NOTE: The definition of user "tftp" exists and will not
be duplicated.
WARNING: The "configure" script for "Ignite-UX" had a warning (exit
code "2"). The script location was
"/var/tmp/BAA012093/catalog/Ignite-UX/pfiles/configure".
* This script had warnings but the execution of this product
will still proceed. Check the above output from the script
for further details.
NOTE: A new version of "/var/opt/ignite/server/ignite.defs" has been
installed on the system.
ERROR: Could not select the software
"Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP".
This software does not exist in the target. You must specify
either the correct target, or the correct software selections.
NOTE: The command "/usr/sbin/swmodify" exited with a status code of
"1". The following is the output from the command:
ERROR: Could not select the software
"Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP".
This software does not exist in the target. You must specify
either the correct target, or the correct software selections.
NOTE: End of command output. Non-zero exit status may or may not be
a failure. Look for additional messages.
ERROR: The swmodify command failed for
Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP.
The configuration process will proceed.
ERROR: Rebuilding the Installed Products Database has failed. You
may need to retry this operation.

* Summary of Execution Phase:
ERROR: Skipped (in analysis) Ignite-UX.BOOT-COMMON-IA,r=C.7.13.259
ERROR: Skipped (in analysis) Ignite-UX.BOOT-COMMON-PA,r=C.7.13.259
ERROR: 2 of 17 filesets had Errors.
* 1 of 17 filesets were Skipped.
* 14 of 17 filesets had no Errors or Warnings.
ERROR: The Execution Phase had errors and warnings. See the above
output for details.


======= 11/11/11 09:18:37 GMT END install AGENT SESSION (pid=12093)
(jobid=gcrmdbt01-0068)
#

==========================================

vatless
Patrick Wallek
Honored Contributor

Re: Problem with Ignite installation

I would 'swremove' the current version of Ignite and then try installing the new version.

 

I have had better luck that way than by just updating Ignite in place.

VtoK
Occasional Advisor

Re: Problem with Ignite installation

bash-3.2# swremove /oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot IGNITE

======= 11/11/11 18:56:04 WST BEGIN swremove SESSION
(non-interactive) (jobid=gcrmdbt01-0069)

* Session started for user "root@gcrmdbt01".

* Beginning Selection
* Target connection succeeded for "gcrmdbt01:/".
ERROR: Could not remove the software selection
"/oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot";
it is not available from depot or root "gcrmdbt01:/".
* Software selection failed for "gcrmdbt01:/".
* Software selections:
IGNITE,r=C.7.13.259,a=HP-UX_B.11.00_32/64,v=HP
Ignite-UX.BOOT-KRN-11-31,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-SERVICES,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-DOC,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-SRC,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-DOC,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-SRC,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.FILE-SRV-11-31,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNITE,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-ENG-A-MAN,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-E-MAN,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-S-MAN,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.MGMT-TOOLS,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
Ignite-UX.RECOVERY,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
* Selection succeeded.


* Beginning Analysis
* Session selections have been saved in the file
"/.sw/sessions/swremove.last".
ERROR: "gcrmdbt01:/": The software dependencies for 1 products or
filesets cannot be resolved.
* "gcrmdbt01:/": 1 bundles cannot be removed because not all of
their filesets can be removed.
* The analysis phase failed for "gcrmdbt01:/".
* Analysis had errors.


* Beginning Execution
ERROR: "gcrmdbt01:/": 2 filesets were determined to be skipped in
the analysis phase.
* The execution phase failed for "gcrmdbt01:/".
* Execution had errors.


ERROR: More information may be found in the agent logfile using the
command "swjob -a log gcrmdbt01-0069 @ gcrmdbt01:/".

======= 11/11/11 18:56:10 WST END swremove SESSION (non-interactive)
(jobid=gcrmdbt01-0069)

bash-3.2# swremove IGNITE

======= 11/11/11 18:56:20 WST BEGIN swremove SESSION
(non-interactive) (jobid=gcrmdbt01-0070)

* Session started for user "root@gcrmdbt01".

* Beginning Selection
* Target connection succeeded for "gcrmdbt01:/".
* Software selections:
IGNITE,r=C.7.13.259,a=HP-UX_B.11.00_32/64,v=HP
Ignite-UX.MGMT-TOOLS,l=/,r=C.7.13.259,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.13.259,fa=HP-UX_B.11.11_32/64
* Selection succeeded.


* Beginning Analysis
* Session selections have been saved in the file
"/.sw/sessions/swremove.last".
ERROR: "gcrmdbt01:/": The software dependencies for 1 products or
filesets cannot be resolved.
* "gcrmdbt01:/": 1 bundles cannot be removed because not all of
their filesets can be removed.
* The analysis phase failed for "gcrmdbt01:/".
* Analysis had errors.


NOTE: More information may be found in the agent logfile using the
command "swjob -a log gcrmdbt01-0070 @ gcrmdbt01:/".

======= 11/11/11 18:56:21 WST END swremove SESSION (non-interactive)
(jobid=gcrmdbt01-0070)

bash-3.2#

vatless
Torsten.
Acclaimed Contributor

Re: Problem with Ignite installation

swremove /oracle/install/Ignite-UX-11.31_C.7.13.259_HP-UX_B.11.00_32_64.depot IGNITE


this will remove ignite from the depot, not from the system!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
VtoK
Occasional Advisor

Re: Problem with Ignite installation

And how to remove from the system?

vatless
Torsten.
Acclaimed Contributor

Re: Problem with Ignite installation

Better run "swremove" as interactive session and mark all Ignite related items for removal.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Dennis Handly
Acclaimed Contributor

Re: Problem with Ignite installation

>And how to remove from the system?

 

swremove IGNITE

 

You may have already removed it when you tried to remove both it and the bogus depot.