Strange entry in make_net_recovery logs

[Albert_31]

Hello & Shalom To everyone,

Just wanted to update you all that the issue is still pending and the culprit is nowwhere in sight :(..

I have found that it is the save_config (ascii file) command that runs the lssf command to generate the i/o paths in system configuration file, i have played with it today (save_config) file however it did not fail at all (i have captured the values that are input to the lssf command..no wrong devices at all)..it does not give that message at all..

any hints..

regards

albert

[Darrel Louis]

Hi Albert,

Can you please post the following:

cd /dev/dsk
lssf c11*
ioscan -fn
insf -e
lssf c11*

You get the error message when a device file doesn't exists, see below
[gtsx201:root]# lssf c6*
lssf: c6*: No such file or directory

Darrel

[Albert_31]

here the outputs..

[Darrel Louis]

Albert,

What I can see from the output a disk, on c10 and c11, was added yesterday to this server, is that correct?
brw-r----- 1 bin sys 31 0x0be400 Jun 5 12:17 c11t14d4
brw-r----- 1 bin sys 31 0x0ae400 Jun 5 12:17 c10t14d4

Did insf -e create any device files today or is there an error message in your syslog.
Does dmesg report any issue?

Darrel

[Albert_31]

Hello Darrel,

The error is being reported from May 5th onwards.

the new devices were created yesterday since we presented a new lun to the server.

As informed earlier and as in the output, there is no error with lssf command output run manually.

regards

albert

[Darrel Louis]

Albert,

As we can disks has been added since the 4th of May, since that day your ignite is generating the error message.
But did you remove disks aswell?
The disks added on the 4th of may are starting from lun4 till 7.
Did you had any disks from lun0 till 3 on instance 11.
This is purely for my understanding.

Darrel

[Albert_31]

A big THANK YOU to everyone for giving their inputs on this strange issue.

To make a big story short.. THE MESSAGE IS A FALSE MESSAGE.

Have modified the save_config command to print the list of disks being populated to the lssf command output, it comes out clean. Though the message is being logged.

Logged a support case with HP and it comes to light that it is a BUG, solution upgrade to c.6.x..

Thanks once again and happy foruming..

albert

[Albert_31]

Issue with IGNITE UX..