Ignite-UX

System Panic by Alert Level:12 = Software failure

 
Rogério Degásperi
New Member

System Panic by Alert Level:12 = Software failure

Message gsp log:
Log Entry # 10 :
DATE: 05/12/2011 TIME: 13:13:26
ALERT LEVEL: 12 = Software failure

SOURCE: 1 = processor
SOURCE DETAIL: 1 = processor general SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail

CALLER ACTIVITY: B = system panic STATUS: 0
CALLER SUBACTIVITY: 80 = implementation dependent
REPORTING ENTITY TYPE: E = HP-UX REPORTING ENTITY ID: 01

0xF8E000C01100B800 00000000 0000B800 - type 31 = legacy PA HEX chassis-code
0x58E008C01100B800 00006709 070D2E2F - type 11 = Timestamp 05/12/2011 13:13:26
Type CR for next entry, - CR for previous entry, Q CR to quit.

The rp5470 generate a dump and I reset manualy.
I speak portuguese from brazil, please Anyone got any idea ?
4 REPLIES 4
Michael Steele_2
Honored Contributor

Re: System Panic by Alert Level:12 = Software failure

What's in /etc/shutdownlog?
What's in /etc/opt/resmon/log/*
What's in /var/adm/syslog/OLDsyslog.log?
What's in /var/tombstones/ts99?

SOURCE: 1 = processor / CPU failure
Support Fatherhood - Stop Family Law
Torsten.
Acclaimed Contributor

Re: System Panic by Alert Level:12 = Software failure

It is important to tell the system model!

# model

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Laurent Menase
Honored Contributor

Re: System Panic by Alert Level:12 = Software failure

Have the dump analyzed by hp support.


you can also look at the stack trace on the console log.
Dennis Handly
Acclaimed Contributor

Re: System Panic by Alert Level:12 = Software failure

Anything in particular you where doing when it crashed?