Tape recover archiving

[Josee Bourget-Thuma]

Hi,

I'm trying to create an tape on one of my systems but when kicking off the process I get: nfs mount: mount_nfs: mount: /var/opt/ignite/recovery/client_mnt: Device busy

I've checked my exports and they are correct.

Any ideas?
Thanks in advance!
Josee...

[Cheryl Griffin]

The error still indicates a problem in the /etc/exports file. Perhaps something is misspelled?
# exportfs -v
Look for a line to read:
/var/opt/ignite/clients -anon=2

If there is extra options or the incorrect options, you will receive an error.

Note: Make sure you use the latest version of Ignite: B.4.1
http://www.software.hp.com/products/IUX/download.html

[Josee Bourget-Thuma]

Thanks but that did not solve anything.

I have the latest Ignite install. The exports are fine.

I'm thinking it's something else. I also get to following error:

Failed mounting directory /var/opt/ignite/recovery/lint-Mant:/Connection refused (errno - 239)

Not sure where to look but think this might have to do with ssh maybe?

Thanks again!
Josee